How to Fix Windows 11 WiFi Keeps Disconnecting When Plugged In

A peculiarly frustrating phenomenon experienced by Windows 11 laptop users is a Wi-Fi connection that functions flawlessly on battery power, but immediately disconnects, drops packets, or shows “No Internet, secured” the instant the AC power charger is plugged in. Unplugging the charger restores Wi-Fi instantly, while plugging it back in kills the wireless link.

While this issue seems counter-intuitive (since plugged-in devices have unlimited electrical power), it is usually caused by conflicting power profile policies in Windows, aggressive Wi-Fi adapter power-saving states, electromagnetic interference from ungrounded power adapters, or outdated wireless network drivers. Follow these targeted steps to eliminate the disconnection loop.

Disable Network Adapter Power Management Suspension

Windows includes a power-saving feature that allows the operating system to shut down the wireless card to conserve energy. Buggy hardware drivers frequently misinterpret the transition to plugged-in AC power and put the Wi-Fi controller to sleep.

  1. Press Win + X and select Device Manager.
  2. Expand the Network adapters category.
  3. Right-click your primary Wi-Fi adapter (e.g. Intel Wi-Fi 6 AX201 or Realtek RTL8852AE) and select Properties.
  4. Switch to the Power Management tab.
  5. Untick the option: Allow the computer to turn off this device to save power.
  6. Click OK to apply the change.

Set Wireless Adapter Settings to Maximum Performance on AC Power

Windows power plans maintain independent performance profiles for battery operation versus plugged-in operation. If the plugged-in profile is configured incorrectly, power throttling will destabilize the radio receiver.

  • Press Win + R, type control.exe powercfg.cpl,,3, and press Enter to launch Advanced Power Options directly.
  • In the list, expand Wireless Adapter Settings > Power Saving Mode.
  • Ensure that Plugged in is set to Maximum Performance.
  • Click Apply and OK.
  • If the Wireless Adapter Settings menu is missing in Windows 11, open Terminal as administrator and run:
    powercfg -setacvalueindex scheme_current 19cbb8fa-5279-450e-9fac-8a3d5fedd0c1 12bbebe6-58d6-4636-95bb-3217ef867c1a 0

Diagnose AC Charger Electromagnetic Interference (EMI)

Poorly shielded or ungrounded third-party USB-C laptop chargers and power bricks can emit high-frequency electromagnetic noise directly into the laptop chassis, overpowering sensitive internal Wi-Fi antenna arrays.

  1. Disconnect the laptop charger from the wall socket and plug it into an entirely different electrical socket on a different wall circuit.
  2. If using a two-prong ungrounded charging brick, switch to an official OEM three-prong grounded power adapter to eliminate chassis electrical noise.
  3. If using a USB-C charging cable running parallel to an external monitor or USB 3.0 hub, separate the cables, as unshielded USB 3.0 lines radiate interference across the 2.4 GHz wireless spectrum.

Adjust 802.11 Wireless Roaming Aggressiveness

When charging, the Wi-Fi card operates at higher power levels, causing it to detect distant neighbouring access points more acutely. If roaming aggressiveness is high, the card continuously attempts to switch access points, dropping active streams.

  • In Device Manager, double-click your Wi-Fi adapter and open the Advanced tab.
  • Select Roaming Aggressiveness from the Property list.
  • Change the value to Lowest or Medium-Low.
  • Next, select Preferred Band and choose 5GHz band (or 6GHz if supported by your router) to avoid noisy 2.4 GHz interference.
  • Click OK and test connectivity while charging.

Perform a Clean Reinstallation of Wi-Fi Adapter Drivers

Damaged network driver registry entries often fail during hardware AC state changes.

  1. Download the latest official Wi-Fi driver directly from your laptop manufacturer’s website (or Intel Driver & Support Assistant).
  2. In Device Manager, right-click your Wi-Fi adapter and select Uninstall device.
  3. Tick “Attempt to remove the driver for this device” and click Uninstall.
  4. Restart your laptop.
  5. Run the newly downloaded driver installer to apply a fresh, uncorrupted driver stack.

Get the best tech tips delivered straight to your inbox.

Join thousands of readers mastering Apple, Google, Microsoft, and Linux.