Attempting to upgrade your computer to Windows 11 or performing a clean installation from a bootable USB drive only to be blocked by the message “This PC can’t run Windows 11. This PC doesn’t meet the minimum system requirements to install this version of Windows” is one of the most widespread setup hurdles. Windows 11 introduced strict foundational hardware security baselines, specifically mandating a compatible 64-bit multi-core processor, UEFI firmware with Secure Boot capability, and a Trusted Platform Module (TPM) version 2.0. On millions of modern computers, these hardware capabilities are already physically present on the motherboard and processor but are simply disabled by default in the UEFI/BIOS settings. This definitive technical guide explains Windows 11’s hardware security requirements, shows you how to enable TPM 2.0 and Secure Boot across major motherboard brands, and demonstrates official registry overrides for unsupported hardware.
Why Does Windows 11 Require TPM 2.0 and Secure Boot?
Microsoft engineered Windows 11 around hardware-enforced isolation. Understanding these requirements clarifies the error:
- Trusted Platform Module (TPM 2.0): A dedicated cryptographic microprocessor (or firmware implementation like Intel PTT or AMD fTPM) that secures encryption keys for BitLocker, Windows Hello, and credential guards.
- UEFI Secure Boot: A security standard in modern firmware that verifies digital signatures of bootloaders and kernel drivers, preventing bootkits and rootkits from hijacking the startup process.
- Legacy BIOS (MBR) vs UEFI (GPT): Older Windows installations running on legacy Master Boot Record partitions cannot support Secure Boot without conversion to GUID Partition Table (GPT).
- Processor Generation Whitelisting: Windows 11 officially supports Intel 8th Gen and newer, AMD Ryzen 2000 series and newer, and Qualcomm Snapdragon 7c/8c/8cx chips.
Method 1: Verify Current TPM and Secure Boot Status in Windows
Before entering BIOS, check what your operating system currently detects.
- Press Windows Key + R, type
tpm.msc, and hit Enter to open the TPM Management console. - Under the Status section, verify whether it reports “The TPM is ready for use”. Under TPM Manufacturer Information, verify that Specification Version: 2.0 is listed.
- If the window says “Compatible TPM cannot be found”, the feature is disabled in BIOS.
- Next, press Windows Key + R, type
msinfo32, and press Enter. - In System Summary, check BIOS Mode (must say UEFI) and Secure Boot State (must say On).
Method 2: Enable TPM 2.0 (PTT or fTPM) in UEFI/BIOS
Most modern processors manufactured since 2017 feature integrated firmware TPM that can be enabled with a single toggle.
- Restart your computer. As the manufacturer logo appears, press your BIOS setup key (typically F2, Del, F10, or F12).
- Switch to Advanced Mode (usually F7).
- Locate the CPU or Security configuration menu:
- For Intel Motherboards (ASUS, MSI, Gigabyte, ASRock): Look for Intel Platform Trust Technology (PTT) or Intel PTT under Security or Advanced > PCH-FW Configuration. Set it to Enabled.
- For AMD Motherboards: Look for AMD fTPM switch, AMD CPU fTPM, or Firmware TPM under Advanced > AMD fTPM Configuration. Set it to AMD CPU fTPM or Enabled.
- Press F10 to save changes and restart.
Method 3: Enable UEFI Secure Boot
Secure Boot ensures that only cryptographically verified operating system loaders can execute at startup.
- In UEFI/BIOS, navigate to the Boot or Security tab.
- Locate the CSM Support (Compatibility Support Module) setting and set it to Disabled (Secure Boot requires pure UEFI and cannot function with legacy CSM enabled).
- Locate Secure Boot and set it to Enabled.
- If Secure Boot Mode is set to Custom, change it to Standard.
- Press F10 to save and restart.
Method 4: Convert Legacy MBR Drive to GPT without Data Loss
If your system drive is formatted with an older Master Boot Record (MBR) partition table, you cannot enable pure UEFI mode without converting to GPT.
- Open Command Prompt as Administrator in Windows.
- Validate your drive for non-destructive conversion:
mbr2gpt /validate /allowFullOS - If validation succeeds, execute the conversion:
mbr2gpt /convert /allowFullOS - Once conversion finishes successfully, restart into BIOS, disable CSM, and enable Secure Boot as outlined in Method 3.
Method 5: Bypass TPM 2.0 and Secure Boot Checks via Registry (Clean Install)
If you are installing Windows 11 on older hardware that lacks physical TPM 2.0, Microsoft’s installer allows official setup bypass keys.
- When the Windows 11 Setup installer displays the “This PC can’t run Windows 11” error screen, press Shift + F10 to open a Command Prompt window.
- Type
regeditand hit Enter to launch Registry Editor. - Navigate to:
HKEY_LOCAL_MACHINE\SYSTEM\Setup - Right-click on the Setup key, select New > Key, and name it:
LabConfig - Select the new
LabConfigkey. In the right pane, right-click and create two DWORD (32-bit) Values:BypassTPMCheck– set value data to1BypassSecureBootCheck– set value data to1
- Close the Registry Editor and Command Prompt.
- Click the Back arrow in the upper-left corner of the Windows Setup window, then click Next again. The installer will proceed with installation without interruption.