How to Fix ‘Reboot and Select Proper Boot Device’ in Windows 11

Powering on your desktop workstation or laptop only to face a black screen displaying the stark text Reboot and Select proper Boot device or Insert Boot Media in selected Boot device and press a key is a stressful boot failure. This error indicates that the motherboard BIOS or UEFI firmware performed its Power-On Self-Test (POST) and queried storage controllers, but could not discover an active storage drive containing a valid Master Boot Record (MBR) or GUID Partition Table (GPT) EFI bootloader. While commonly mistaken for a dead hard drive or solid-state drive, this malfunction is frequently caused by altered BIOS boot order settings, loose SATA or NVMe connections, corrupted EFI system partitions, or CMS legacy boot mode conflicts.

What Causes ‘Reboot and Select Proper Boot Device’?

When a PC starts up, the UEFI firmware inspects all connected drives for a valid bootable partition (such as the Windows Boot Manager located on the EFI system partition). The error triggers when:

  • Altered Boot Device Order: The BIOS/UEFI prioritising a non-bootable external USB flash drive, external hard drive, or empty secondary storage disk ahead of the primary OS drive.
  • Corrupted Boot Configuration Data (BCD): Unexpected system power loss or aborted Windows updates damaging the EFI partition pointers on disk.
  • CSM / Legacy Mode vs UEFI Mismatch: Motherboard firmware reverting to legacy CSM mode after a CMOS battery drain or BIOS update, preventing the system from recognising Windows 11’s mandatory UEFI GPT bootloader.
  • Physical Cable or NVMe Slot Disconnection: Thermal expansion or physical transit dislodging internal SATA cables or causing loose contact in M.2 NVMe slots.

Step 1: Disconnect All External USB Storage Drives

If an external hard drive, USB memory stick, or SD card is inserted into your PC, the motherboard may attempt to boot from it before checking your internal drive.

  1. Unplug all external USB storage devices, portable drives, and memory cards.
  2. Disconnect secondary peripheral hubs.
  3. Press Ctrl + Alt + Del or hold the power button to restart the computer.
  4. If Windows 11 boots normally, enter your BIOS settings to prevent USB storage from taking boot priority over your primary SSD.

Step 2: Correct Boot Priority in BIOS / UEFI Settings

Verifying that your internal NVMe or SATA SSD is recognised and assigned top priority in the motherboard boot hierarchy resolves the majority of boot failures.

  1. Restart your computer and repeatedly tap the designated setup key (typically F2, Del, F10, or F12) as the manufacturer logo appears.
  2. Once inside the BIOS/UEFI utility, navigate to the Boot or Boot Priority tab.
  3. Locate the Boot Option Priorities list.
  4. Ensure that Windows Boot Manager (associated with your primary solid-state drive) is set as Boot Option #1.
  5. Verify that Boot Mode is configured strictly as UEFI (disable Legacy or CSM Support, as Windows 11 requires native UEFI).
  6. Press F10 to save changes and exit. The computer will restart and attempt to launch Windows.

Step 3: Rebuild the EFI Bootloader and BCD via Windows Recovery

If the BIOS detects your drive but Windows Boot Manager is missing or damaged, recreating the EFI partition boot files restores normal startup.

  1. Insert a Windows 11 installation USB flash drive and boot from it.
  2. Choose your language preferences, click Next, and click Repair your computer in the bottom-left corner.
  3. Select Troubleshoot > Advanced options > Command Prompt.
  4. Type diskpart and press Enter.
  5. Execute list disk followed by select disk 0 (replace 0 with your primary drive number).
  6. Type list volume to locate the FAT32 EFI partition (typically 100 MB to 500 MB in size).
  7. Assign the EFI volume a temporary drive letter by running:
    select volume <volume_number>
    assign letter=V:
    exit
  8. Regenerate the complete BCD boot files onto the partition by executing:
    bcdboot C:\Windows /s V: /f UEFI
  9. Close Command Prompt, remove the installation USB, and restart your computer.

Step 4: Verify Physical Drive Connections

If your SSD or hard drive is completely missing from the BIOS storage configuration screen, the hardware interface may have lost physical connection.

  1. Power down your computer and disconnect the main power cable from the wall.
  2. Open your PC chassis or laptop service panel.
  3. For 2.5-inch SATA drives: Re-seat both the SATA data cable and power cable firmly at both the drive and motherboard headers.
  4. For M.2 NVMe SSDs: Unscrew the mounting screw, gently slide the drive out of the M.2 slot, clean the gold contact pins with a dry microfibre cloth, re-insert the drive at a 30-degree angle, and re-tighten the screw securely.
  5. Power on the PC and enter BIOS to confirm the drive model name is now detected.

Get the best tech tips delivered straight to your inbox.

Join thousands of readers mastering Apple, Google, Microsoft, and Linux.