How to Fix “No Internet, Secured” Wi-Fi Error in Windows 11

You turn on your Windows 11 laptop or desktop, look at the taskbar, and see your Wi-Fi is connected with full signal bars. Yet when you attempt to open a webpage or join an online meeting, nothing loads. Hovering over the Wi-Fi icon reveals the frustrating status message: “No Internet, secured”. Meanwhile, your phone, tablet, and smart TV connected to the exact same router are browsing the web without a hitch.

The “No Internet, secured” message means your computer has successfully established an encrypted wireless connection to your router, but Windows cannot communicate with the wider internet or resolve domain names. Here is the step-by-step procedure to resolve this network roadblock.

1. Flush DNS and Reset the Windows TCP/IP Stack

In most instances, corrupted routing tables or stale DNS resolver caches prevent Windows from reaching internet gateways. Rebuilding the network stack using Command Prompt resolves the conflict immediately.

  1. Click the Windows Start menu, type cmd, right-click on Command Prompt, and select Run as administrator.
  2. Type the following commands one by one, pressing Enter after each:
    ipconfig /release
    ipconfig /flushdns
    ipconfig /renew
    netsh winsock reset
    netsh int ip reset
  3. After the final command executes, restart your computer to apply the clean networking protocols.

2. Switch to a Reliable Public DNS Server (Google or Cloudflare)

If your internet service provider’s default DNS server is suffering an outage or failing to respond to your router’s queries, Windows cannot translate website names (such as google.com) into IP addresses, resulting in the “No Internet” status.

  1. Open Settings and navigate to Network & internet > Wi-Fi.
  2. Click on Hardware properties.
  3. Next to DNS server assignment, click Edit.
  4. Change the drop-down menu from “Automatic (DHCP)” to Manual and toggle on IPv4.
  5. Enter Google’s high-speed public DNS addresses:
    • Preferred DNS: 8.8.8.8
    • Alternate DNS: 8.8.4.4
    (Or Cloudflare’s DNS: 1.1.1.1 and 1.0.0.1).
  6. Click Save and test your connection.

3. Disable VPN and Third-Party Antivirus Network Filters

Virtual Private Network (VPN) applications install virtual network TAP adapters on Windows. If a VPN crashes or fails to terminate cleanly, its built-in “kill switch” remains engaged, actively blocking all unencrypted internet traffic from reaching your router.

Open your VPN software and disconnect properly, or temporarily uninstall third-party security suites that include web-shield firewalls to verify whether their background filtering drivers are obstructing outbound traffic.

4. Disable and Re-Enable Your Wireless Network Adapter

Power management states can occasionally leave the wireless adapter in an unstable state upon waking from sleep mode.

  1. Press Windows Key + R, type ncpa.cpl, and press Enter to open classic Network Connections.
  2. Right-click your Wi-Fi adapter and select Disable.
  3. Wait 10 seconds, then right-click the adapter again and select Enable.
  4. Windows will re-negotiate a fresh IP address and default gateway with your home router.

5. Perform a Clean Windows Network Reset

If the error persists after trying the previous methods, utilise Windows 11’s automated Network Reset utility to restore all networking components to their initial factory settings.

  1. Go to Settings > Network & internet > Advanced network settings.
  2. Click on Network reset.
  3. Click the Reset now button and confirm with Yes.
  4. Windows will reboot automatically after 5 minutes, reinstalling all network hardware drivers cleanly.

Frequently Asked Questions

Why does my phone have internet on the same Wi-Fi but Windows says “No Internet”?

Smartphones typically use fallback DNS servers and modern IPv6 routing automatically. Windows 11 relies strictly on standard DHCP gateway replies from the router; if an internal driver handshake fails, Windows reports no internet even though the physical Wi-Fi link is active.

Can a simple router reboot fix “No Internet, secured”?

Yes. If your router’s DHCP server has exhausted its pool of local IP addresses or experienced a routing table crash, unplugging your router’s power lead for 30 seconds and plugging it back in often clears the deadlock across all connected devices.

Get the best tech tips delivered straight to your inbox.

Join thousands of readers mastering Apple, Google, Microsoft, and Linux.