Connecting your Windows 11 laptop or desktop to your home, office, or enterprise local area network only to be interrupted by a persistent system tray notification warning “Windows has detected an IP address conflict: Another computer on this network has the same IP address as this computer” results in immediate network disruption. When two devices on the same local subnet share an identical Internet Protocol (IP) address, the network switch or wireless access point cannot determine which physical MAC address should receive inbound data packets. Consequently, both devices frequently lose internet access, suffer severe packet loss, or drop internal LAN file shares. This collision typically occurs due to stale Dynamic Host Configuration Protocol (DHCP) server leases, static IP address misconfigurations, or network devices waking from sleep with expired leases. This guide explains how ARP and IP resolution work and details proven steps to resolve the conflict.
Why Does Windows Detect an IP Address Conflict?
Every device communicating on an IPv4 local network requires a unique IP address (such as 192.168.1.105) to route data packets:
- Static IP Overlap: A device (such as a network printer, NAS drive, or secondary PC) was manually configured with a static IP address that falls directly inside your router dynamic DHCP assignment pool.
- DHCP Lease Desynchronization: Your router DHCP server reallocated an IP address while your computer was asleep or disconnected, but your PC retains the old lease upon waking.
- Multiple Active DHCP Servers: Running two routers or a Wi-Fi mesh node alongside an ISP gateway with active DHCP servers handing out overlapping subnets.
- Corrupted Local Address Resolution Protocol (ARP) Cache: Outdated ARP table mappings binding your router gateway IP to an obsolete physical MAC address.
Method 1: Release and Renew the IP Address via Command Prompt
Forcing Windows to surrender its current lease and request a completely fresh, unique IP from your router DHCP server.
- Press Windows Key + S, type
cmd, right-click Command Prompt, and select Run as administrator. - Surrender your existing conflicting IP address by running:
ipconfig /release - Wait a few seconds until your network adapter reports that the IPv4 address is unassigned.
- Request a fresh, conflict-free IP address from your router:
ipconfig /renew - Review the output; verify that your adapter has received a new IPv4 address and that the conflict warning disappears.
Method 2: Flush the ARP Cache
The Address Resolution Protocol (ARP) table maps IP addresses to physical hardware MAC addresses. Flushing it removes conflicting pointers.
- Open Command Prompt as administrator.
- View your current ARP mappings:
arp -a - Purge the entire ARP cache by executing:
netsh interface ip delete arpcache - Windows will immediately rebuild pristine hardware-to-IP relationships as fresh network frames arrive.
Method 3: Configure Windows to Obtain an IP Address Automatically (DHCP)
If your computer was previously assigned a manual static IP address, reverting to automatic DHCP eliminates conflicts.
- Press Windows Key + R, type
ncpa.cpl, and press Enter to open Network Connections. - Right-click your active network adapter (Wi-Fi or Ethernet) and select Properties.
- Click on Internet Protocol Version 4 (TCP/IPv4) and click Properties.
- Ensure that Obtain an IP address automatically is selected.
- Ensure that Obtain DNS server address automatically is also selected (unless using custom public DNS).
- Click OK and restart your PC.
Method 4: Assign a Conflict-Free Static IP Outside the DHCP Pool
If you require a permanent static IP for hosting, assigning an address outside the router dynamic range prevents collisions.
- Log in to your home router admin dashboard (typically accessible via
192.168.1.1or192.168.0.1in your browser). - Locate the DHCP Settings and check the dynamic IP pool range (e.g.,
192.168.1.100to192.168.1.200). - On your Windows 11 PC, open Settings > Network & internet > Wi-Fi (or Ethernet).
- Click Hardware properties > next to IP assignment, click Edit.
- Select Manual and toggle IPv4 to On.
- Choose an IP address outside the DHCP range (such as
192.168.1.220). - Enter
255.255.255.0as the Subnet mask and enter your router gateway (e.g.,192.168.1.1). - Click Save.
Method 5: Restart the Local Router to Clear DHCP Leases
A router restart flushes all dynamic lease tables and prompts every connected smartphone, PC, and smart device to negotiate fresh addresses.
- Disconnect the power cord from the back of your wireless router.
- Wait 30 seconds to allow memory tables to clear.
- Plug the power cable back in.
- Wait approximately 2 minutes for the router to complete its self-test and DHCP server initialization.
- Your Windows 11 device will automatically negotiate a clean, unique IP lease.