How to Fix Audio Echo and Feedback in Google Meet

Conducting virtual team conferences, webinars, or remote interviews on Google Meet requires crisp, intelligible sound. However, hearing your own voice repeat after a slight delay, or having meeting participants complain of a screeching acoustic loop: ‘There is a terrible echo on this call’ completely halts discussion. Audio feedback loops and echoes occur when a participant’s microphone captures the incoming audio output from their computer speakers and feeds it back into the conference bridge. Correcting hardware endpoint routing and configuring Google Meet’s native acoustic echo cancellation restores crystal-clear audio.

Why Does Google Meet Produce Audio Echo and Feedback?

Audio echo is primarily an acoustic and signal-processing challenge rather than a platform server error. Common causes include:

  • Loud External Speakers Feeding Microphones: Using external desktop speakers or laptop built-in speakers at high volume while using an unshielded omnidirectional microphone.
  • Disabled Cloud Noise Cancellation: Google Workspace noise cancellation algorithms turned off or not supported by the browser session.
  • Multiple Active Microphones in the Same Physical Room: Two or more colleagues joining the same Google Meet call from adjacent desks without Companion Mode.
  • Stereo Mix / Virtual Audio Loopbacks: Virtual audio cables (such as Voicemeeter, OBS Virtual Audio, or Stereo Mix) routing system output sounds into the recording input.
  • Hardware Echo Cancellation Glitches in Browser: WebRTC acoustic echo cancellation (AEC) failing to calibrate due to sample rate mismatches between input and output devices.

Step 1: Isolate the Echo Culprit via Participant Indicators

In group calls, finding which participant is generating the loop prevents unnecessary adjustments for everyone else.

  1. In Google Meet, click the People tab on the right side of the bottom control bar to view the attendees list.
  2. Observe the three vertical audio volume bars next to each person’s name while an echo occurs.
  3. When you speak and hear your voice repeat, watch which attendee’s microphone icon animates with sound waves.
  4. The participant whose microphone pulses when you speak is the source of the acoustic reflection.
  5. Ask that person to mute their microphone temporarily or switch to a dedicated headset. Meeting hosts can also click the three dots next to the user and select Mute.

Step 2: Connect a Headset or Dedicated Headphones

Physical acoustic separation between sound output and microphone input is the most reliable solution to echo.

  1. Plug in a standard 3.5mm or USB headset, or connect Bluetooth wireless earbuds (such as AirPods or Pixel Buds).
  2. In Google Meet, click the three-dot More options button on the bottom bar and select Settings.
  3. Navigate to the Audio tab.
  4. Under Microphone, select your headset microphone.
  5. Under Speakers, explicitly select your headset speakers (avoid leaving it set to Default if laptop speakers are still active).
  6. Click Test next to Speakers to verify audio plays exclusively through the earcups.

Step 3: Enable Google Meet Noise Cancellation

Google provides AI-powered cloud noise cancellation that filters out background keystrokes, echoes, and ambient reverberation.

  1. In Google Meet, open Settings > Audio.
  2. Locate the toggle labelled Noise cancellation.
  3. Toggle it On. Google Meet will continuously analyze audio packets and remove vocal reflections.
  4. If you are in a shared physical conference room with multiple laptops, ensure secondary participants join using Companion Mode (select Use Companion mode on the green room joining screen) so their microphones and speakers remain hardware-disabled.

Step 4: Disable ‘Listen to This Device’ in Windows Sound Properties

If you hear an instantaneous echo of your own voice even when nobody else is on the call, Windows microphone monitoring is enabled.

  1. Press Windows + R, type mmsys.cpl, and press Enter.
  2. Switch to the Recording tab.
  3. Right-click your active microphone and select Properties.
  4. Switch to the Listen tab.
  5. Ensure the box labelled Listen to this device is completely unchecked.
  6. Click Apply and OK.

Step 5: Match Audio Sample Rates in Operating System Settings

Sample rate mismatches between microphone inputs (e.g., 44,100 Hz) and speaker outputs (e.g., 48,000 Hz) cause WebRTC software echo cancellers to desynchronise.

  1. In the Sound control panel (mmsys.cpl), double-click your default Speakers on the Playback tab.
  2. Under the Advanced tab, check the Default Format (for example, 24 bit, 48000 Hz (Studio Quality)).
  3. Switch to the Recording tab, double-click your active Microphone, go to Advanced, and set its Default Format to the matching frequency: 48000 Hz.
  4. Click Apply and OK. Restart your browser to apply unified audio sampling.

Routing sound through dedicated headsets and synchronizing audio hardware parameters eliminates echo and acoustic feedback in all Google Meet conferences.

Get the best tech tips delivered straight to your inbox.

Join thousands of readers mastering Apple, Google, Microsoft, and Linux.