How to Fix ‘The Device Is Not Ready’ (Error 0x80070015) in Windows 11

Connecting an external USB hard drive, accessing an SD card, initializing a fresh solid-state drive, or running Windows Backup in Windows 11 can suddenly fail with an operating system prompt: ‘Location is not available. Drive is not accessible. The device is not ready’, frequently accompanied by error code 0x80070015. This error indicates that while Windows detects a physical hardware storage interface attached to the controller, the storage volume cannot negotiate read/write communication or has entered an uninitialised state.

Why Does Windows 11 Report Error 0x80070015?

The 0x80070015 error code is a Win32 storage subsystem exception. The malfunction typically arises from:

  • Insufficient USB Bus Power: Portable 2.5-inch mechanical hard drives drawing more current than an unpowered USB hub or front-panel port can provide.
  • Corrupted Drive File System (RAW State): The file system header (NTFS, exFAT, or FAT32) becoming damaged due to unexpected cable disconnection without using ‘Safely Remove Hardware’.
  • Diskpart Partition Flags and Offline Status: Storage policies marking the volume as ‘Offline’ due to signature collisions with an internal drive.
  • Outdated or Corrupted USB Host Controller Drivers: Generic USB xHCI controller drivers malfunctioning following major Windows 11 feature updates.
  • Bad Sectors and Hardware Controller Degradation: Deteriorating NAND flash cells on USB thumb drives or damaged magnetic platters preventing track zero from indexing.

Step 1: Test Direct Motherboard USB Ports and Power Supply

Eliminate voltage sag across external hubs and extension cables before executing software diagnostics.

  1. If the drive is connected to a front-panel USB port or multi-port USB hub, disconnect it immediately.
  2. Plug the storage drive directly into a rear I/O USB port mounted on the computer motherboard (or directly into a dedicated Thunderbolt/Type-C port on a laptop).
  3. If using a 3.5-inch desktop external hard drive, verify that its dedicated external AC power adapter is securely connected to a live electrical outlet.
  4. Listen for drive activity: mechanical drives should emit a smooth spinning hum without repetitive clicking or beeping noises.

Step 2: Check Disk Management and Bring Drive Online

Windows may have detected the storage container but placed it into an offline state to prevent signature collisions.

  1. Press Win + X and select Disk Management.
  2. Scroll through the lower panel to find your external disk (e.g. Disk 1 or Disk 2).
  3. Check the status box on the left: if it displays Offline, right-click the disk box and select Online.
  4. If the drive shows as Not Initialised, right-click it, select Initialise Disk, choose GPT (GUID Partition Table), and click OK.
  5. If the partition volume shows unallocated space or a missing drive letter, right-click the volume, select Change Drive Letter and Paths…, and assign a unique letter (e.g. E: or F:).

Step 3: Run CHKDSK to Repair File System Structures

Running the Check Disk utility inspects the partition table and recovers bad sectors.

  1. Press the Start button, type cmd, right-click Command Prompt, and select Run as administrator.
  2. Type the following command (replace X: with the actual drive letter assigned to your problematic device):
    chkdsk X: /f /r
  3. Press Enter. The /f parameter repairs directory errors, while /r locates bad sectors and recovers readable data.
  4. Allow the scan to pass through all stages. Once finished, check whether the drive opens normally in File Explorer.

Step 4: Reinstall USB Controller Drivers in Device Manager

Corrupted USB bus controllers can fail to initialise attached mass storage classes.

  1. Press Win + X and launch Device Manager.
  2. Expand the Universal Serial Bus controllers section.
  3. Right-click each entry named USB Root Hub or Generic USB Hub and select Uninstall device.
  4. Next, expand Disk drives, right-click your external storage device, and choose Uninstall device.
  5. Restart your Windows 11 PC. Windows will automatically re-enumerate all physical USB controllers and reinstall pristine driver binaries upon boot.

Step 5: Clean and Reformat the Drive via Diskpart

If the partition table is permanently corrupted into a RAW state, wiping metadata with Diskpart restores drive usability.

  1. Open Command Prompt as administrator.
  2. Type diskpart and press Enter.
  3. Type list disk and press Enter. Identify your external drive number (e.g., Disk 2 based on storage size).
  4. Type select disk 2 (replace ‘2’ with your actual disk number). Caution: Ensure you select the correct drive to avoid wiping system storage.
  5. Type clean and press Enter to wipe corrupted partition headers.
  6. Type create partition primary and press Enter.
  7. Type format fs=ntfs quick (or format fs=exfat quick for Mac/Windows cross-compatibility).
  8. Type assign, followed by exit. Your drive is now freshly formatted and fully accessible.

Get the best tech tips delivered straight to your inbox.

Join thousands of readers mastering Apple, Google, Microsoft, and Linux.