The TCP Authentication Option (TCP-AO, RFC 5925) provides cryptographic segment protection for mission-critical routing sessions such as BGP peering across wide area networks. In transit carrier environments where middleboxes alter packet padding or segment lengths, discrepancies between the TCP payload length and the MAC calculation input block cause immediate authentication failures. When the Linux kernel encounters segment length mismatches during passive SYN-ACK verification, it silently discards segments, incrementing internal retransmission statistics while logging minimal network-layer diagnostics.
Diagnosing these stealthy authentication failures requires low-overhead kernel tracing. By extracting metrics from struct tcp_sock and correlating the tcpi_retrans_synack counter from TCP_INFO, network engineers can pinpoint transient segment length anomalies using eBPF and bpftrace.
The Segment Length Verification Dynamics in the Linux Kernel
Under RFC 5925, the TCP-AO MAC digest calculation covers the pseudo-header, TCP header (with options masked appropriately), and segment payload. If an intermediate routing hop modifies TCP options or inserts trailing padding that is not accounted for by the local receiver, tcp_ao_verify_header() detects a digest failure and drops the frame.
The key kernel parameters and monitoring offsets are outlined below:
| Kernel Symbol | Source Location | Data Structure Offset | Diagnostic Purpose |
|---|---|---|---|
tcp_ao_verify_header |
net/ipv4/tcp_ao.c |
struct tcp_ao_key * |
Validates AO digest against received segment length |
tcp_get_info |
net/ipv4/tcp.c |
tcpi_retrans_synack |
Reports cumulative SYN-ACK retry count |
tcp_v4_rcv |
net/ipv4/tcp_ipv4.c |
skb->cb |
Traces inbound segment discard points |
Attaching bpftrace Probes to TCP-AO Verification
Run the following bpftrace script to monitor passive handshake retries and highlight segment length verification failures in real time:
sudo bpftrace -e '
#include <net/sock.h>
#include <linux/tcp.h>
kprobe:tcp_ao_verify_header {
$sk = (struct sock *)arg0;
$tp = (struct tcp_sock *)arg0;
$dport = $sk->__sk_common.skc_dport;
// Filter for BGP port 179
if ($dport == 179 || $sk->__sk_common.skc_num == 179) {
@monitored_synacks[$sk] = $tp->retrans_out;
}
}
kretprobe:tcp_ao_verify_header {
if (retval != 0) {
time("%H:%M:%S ");
printf("TCP-AO segment length verification failed with code %d
", retval);
}
}
END {
clear(@monitored_synacks);
}'Reading tcpi_retrans_synack via ss Diagnostic Tooling
Complement kernel probes by inspecting active socket stats using ss:
# Query active TCP-AO enabled sockets with extended TCP_INFO metrics
ss -ti 'sport = :179 or dport = :179'Examine the output for high retrans figures accompanied by stagnant RTT estimators. When correlated with eBPF tcp_ao_verify_header failure return codes, this confirms an asymmetric segment length discrepancy across peers.