The TCP Authentication Option (TCP-AO, RFC 5925) provides cryptographic segment protection for mission-critical routing sessions such as BGP peering across wide area networks. In SmartNIC deployments where security keys are mapped to discrete hardware key slots in the adapter table, exhaustion or misalignment of key slot indexes between the kernel driver and the hardware crypto engine can cause segment authentication checks to fail. When the Linux kernel encounters key slot index discrepancies during passive SYN-ACK processing, it silently discards segments, incrementing internal retransmission statistics while logging minimal network-layer diagnostics.
Diagnosing these stealthy authentication failures requires low-overhead kernel tracing. By extracting metrics from struct tcp_sock and correlating the tcpi_retrans_synack counter from TCP_INFO, network engineers can pinpoint transient hardware key slot anomalies using eBPF and bpftrace.
The Hardware Key Slot Management Dynamics in the Linux Kernel
SmartNIC device drivers maintain an internal lookup table mapping socket MKT definitions to hardware crypto descriptors. When a packet arrives, the NIC extracts the AO Key ID and consults the slot table. If a concurrent re-keying operation leaves the hardware slot in an uninitialised state, verification fails at tcp_ao_verify_header().
The key kernel parameters and monitoring offsets are outlined below:
| Kernel Symbol | Source Location | Data Structure Offset | Diagnostic Purpose |
|---|---|---|---|
tcp_ao_verify_header |
net/ipv4/tcp_ao.c |
struct tcp_ao_key * |
Validates AO digest against hardware key slot state |
tcp_get_info |
net/ipv4/tcp.c |
tcpi_retrans_synack |
Reports cumulative SYN-ACK retry count |
tcp_v4_rcv |
net/ipv4/tcp_ipv4.c |
skb->cb |
Traces inbound segment discard points |
Attaching bpftrace Probes to TCP-AO Verification
Run the following bpftrace script to monitor passive handshake retries and highlight hardware key slot verification failures in real time:
sudo bpftrace -e '
#include <net/sock.h>
#include <linux/tcp.h>
kprobe:tcp_ao_verify_header {
$sk = (struct sock *)arg0;
$tp = (struct tcp_sock *)arg0;
$dport = $sk->__sk_common.skc_dport;
// Filter for BGP port 179
if ($dport == 179 || $sk->__sk_common.skc_num == 179) {
@monitored_synacks[$sk] = $tp->retrans_out;
}
}
kretprobe:tcp_ao_verify_header {
if (retval != 0) {
time("%H:%M:%S ");
printf("TCP-AO hardware key slot verification failed with code %d
", retval);
}
}
END {
clear(@monitored_synacks);
}'Reading tcpi_retrans_synack via ss Diagnostic Tooling
Complement kernel probes by inspecting active socket stats using ss:
# Query active TCP-AO enabled sockets with extended TCP_INFO metrics
ss -ti 'sport = :179 or dport = :179'Examine the output for high retrans figures accompanied by stagnant RTT estimators. When correlated with eBPF tcp_ao_verify_header failure return codes, this confirms a hardware key slot discrepancy across peers.