Inserting a physical SIM card or activating an eSIM on an Android device is expected to immediately register the handset with mobile network towers. However, seeing the persistent cellular notification: ‘SIM 1 not allowed’ or ‘Phone not allowed for voice: MM #2’ leaves the phone completely disconnected from cellular voice, SMS text messaging, and mobile data services. The MM#2 code refers to Mobility Management Cause #2, which indicates that the International Mobile Subscriber Identity (IMSI) is unknown or rejected by the carrier’s Home Location Register (HLR) or modern Unified Data Management (UDM) core.
What Causes ‘SIM 1 Not Allowed’ (MM#2) on Android?
When an Android smartphone attempts to attach to a mobile cellular network, the baseband processor communicates authentication credentials stored on the SIM card to the carrier. Common reasons for registration rejection include:
- Unprovisioned or Inactive SIM Card: The cellular provider has not yet activated the SIM profile, commonly occurring during number porting or new contract activation cycles.
- Carrier Network Blacklist or IMEI Lock: The handset’s unique IMEI number has been flagged or blocked due to reported loss, billing disputes, or region-locking policies imposed by a previous carrier.
- Physical SIM Oxidation or Misalignment: Microscopic debris, dust, or worn gold contact pads on the nano-SIM causing communication timeouts between the SIM tray and the motherboard interface.
- Stale Network Configuration Cache: Corrupted baseband modem parameters or invalid Access Point Name (APN) profiles retained after an operating system firmware update.
- Incorrect Network Operator Selection: The device attempting to register with an incompatible roaming partner rather than the home carrier’s primary radio frequency channels.
Step 1: Check Carrier Activation and Porting Status
Because MM#2 is primarily an authentication failure at the carrier core level, confirm that the mobile carrier has formally authorised the SIM profile.
- If you recently switched cellular providers, ported your mobile number, or received a replacement SIM, contact your provider’s customer support line or web portal.
- Provide your SIM card ICCID (the 19-digit or 20-digit number printed on the plastic card) and device IMEI.
- Confirm that the account is in good standing and that carrier provisioning is fully complete on their backend subscriber database.
Step 2: Inspect, Clean, and Reseat the SIM Card
Physical contamination or slight misalignment in dual-SIM trays frequently triggers transmission errors during initial cellular handshakes.
- Power off your Android device completely.
- Insert a SIM ejector tool into the pinhole on the tray and apply gentle pressure until the tray releases.
- Examine the golden contacts on the nano-SIM card. Wipe them gently using an isopropyl alcohol wipe or a clean microfibre cloth to remove oxidation.
- Ensure the SIM fits flush into the tray without bowing or shifting.
- Reinsert the tray securely into the phone, power on the device, and check if signal bars appear.
Step 3: Manually Select the Mobile Network Operator
Android devices configured to search for networks automatically can sometimes latch onto a foreign network tower that rejects foreign subscriber tokens.
- Open Settings on your Android handset.
- Navigate to Network & internet > SIMs (or Connections > Mobile networks on Samsung Galaxy devices).
- Tap SIM 1 and scroll down to Automatically select network.
- Toggle the switch to Off.
- Wait 30 to 60 seconds while your smartphone scans all available local cellular frequencies.
- From the list of discovered operators, tap your carrier’s exact name to initiate a manual registration attempt.
Step 4: Verify Device Cellular Status via Testing Menu
The Android hardware diagnostic dialer menu exposes real-time baseband radio diagnostics to determine whether voice and data services are being blocked.
- Open the native Phone dialer app.
- Dial:
*#*#4636#*#*(on some models,*#*#4636#*#*launches immediately; on carrier-locked units, access may require developer settings). - Tap Phone information.
- Review the following operational values:
- Voice Service: Check whether it reports
In ServiceorEmergency Calls Only. - Data Service State: Check if connected.
- Mobile Radio Power: Ensure the toggle is turned On.
- Voice Service: Check whether it reports
- Locate Set Preferred Network Type and temporarily select LTE/WCDMA (or NR/LTE/GSM/WCDMA) to ensure the radio does not restrict itself to unavailable millimeter-wave frequencies.
Step 5: Reset Mobile Network Settings
Clearing corrupted cellular caches, Bluetooth pairings, and Wi-Fi profiles forces Android to regenerate default carrier configurations.
- Open Settings and navigate to System > Reset options (or General management > Reset).
- Select Reset Mobile Network Settings (or Reset Wi-Fi, mobile & Bluetooth).
- Select SIM 1 from the drop-down menu if prompted.
- Tap Reset settings and confirm your device lock screen PIN or pattern.
- Reboot the smartphone once the reset routine completes.
Step 6: Verify IMEI Blacklist Status
If the error persists after testing with a known active SIM from another provider, verify whether the hardware itself has been blacklisted.
- Open the dialer and enter:
*#06#to display your device IMEI numbers. - Note the 15-digit number corresponding to IMEI 1.
- Use an official carrier IMEI check portal or your national telecommunications regulator database to verify that the IMEI is not recorded as lost, stolen, or blocked by a previous owner or network provider.
Addressing network provisioning records, cleaning SIM tray contacts, and refreshing mobile baseband settings restores stable cellular voice and data connectivity on Android devices.