Attempting to browse to a website or local development server in Google Chrome only to encounter “This site can’t be reached” alongside the specific error code ERR_ADDRESS_UNREACHABLE means your browser cannot establish an IP route to the destination host. Unlike standard DNS lookup failures where domain names cannot be resolved, ERR_ADDRESS_UNREACHABLE indicates that while an IP address was determined, the network stack cannot transmit data packets to that address due to local routing collisions, proxy deadlocks, or firewall barriers.
Flush Chrome’s Internal DNS and Socket Caches
Google Chrome maintains its own independent DNS resolver and socket pool that can retain stale IP routes even after your operating system network state changes.
- Launch Google Chrome.
- Type the following internal URL into the Chrome address bar and press Enter:
chrome://net-internals/#dns - Click the Clear host cache button to purge all cached domain-to-IP resolutions.
- Next, type the socket configuration URL into the address bar and press Enter:
chrome://net-internals/#sockets - Click Close idle sockets, followed by Flush socket pools.
- Restart Chrome and attempt to reload the failing webpage.
Reset TCP/IP Stack and Flush Windows DNS Cache
Corrupted local routing tables or stale gateway entries in the Windows networking subsystem prevent TCP packets from exiting the local subnet.
- Press Windows Key + S, type cmd, right-click Command Prompt, and select Run as administrator.
- Execute the following commands sequentially, pressing Enter after each line:
ipconfig /flushdns ipconfig /release ipconfig /renew netsh int ip reset netsh winsock reset - Restart your computer to re-initialise all network adapter driver stacks cleanly.
Disable Proxy Servers and VPN Interceptors
Misconfigured local proxy scripts or dead VPN tunnels frequently intercept web requests, steering outbound traffic toward unreachable internal addresses.
- Press Windows Key + I to open Settings.
- Navigate to Network & internet in the left pane and click on Proxy.
- Under the Automatic proxy setup section, ensure Automatically detect settings is turned on, and ensure Use setup script is toggled off.
- Under Manual proxy setup, click Set up (or Edit) next to Use a proxy server and verify that the toggle is set to Off.
- If you use third-party VPN applications, disconnect them completely and test whether the website loads in standard mode.
Switch to Public DNS Resolvers
Default internet service provider (ISP) DNS servers frequently encounter routing blackholes when resolving specific foreign Content Delivery Networks (CDNs).
- Press Windows Key + R, type ncpa.cpl, and press Enter to open Network Connections.
- Right-click your active internet adapter (Wi-Fi or Ethernet) and select Properties.
- Select Internet Protocol Version 4 (TCP/IPv4) and click Properties.
- Select the radio button labelled Use the following DNS server addresses.
- Enter Google Public DNS or Cloudflare DNS:
- Preferred DNS server:
8.8.8.8(or1.1.1.1) - Alternate DNS server:
8.8.4.4(or1.0.0.1)
- Preferred DNS server:
- Click OK to save the configuration.
Power Cycle Your Router and Verify Local IP Subnets
If accessing a local network device (such as a NAS or printer) returns ERR_ADDRESS_UNREACHABLE, router ARP tables may have lost track of the device’s MAC address.
- Disconnect the power cable from your wireless router or modem.
- Wait thirty seconds to allow internal capacitors and memory tables to discharge completely.
- Reconnect the power cable and allow two minutes for broadband synchronisation.
- Ensure your client computer and the target destination reside within the same subnet mask (such as
192.168.1.X).