How to Fix Android Phone Stuck in Fastboot Mode

Powering on an Android smartphone only to be met with a static Fastboot or Bootloader screen displaying the Android mascot or text prompts interrupts normal phone usage. Fastboot is a low-level diagnostic protocol used to flash system images, unlock bootloaders, and modify filesystem partitions. When a smartphone boots into Fastboot repeatedly rather than launching the operating system, it typically signals a physically jammed volume key, corrupted bootloader boot images, an interrupted firmware update, or an active recovery loop. Resolving this issue involves clearing button contacts, executing soft restart sequences, and running terminal fastboot commands.

Perform a Long Hardware Forced Restart

Often, Android enters Fastboot mode temporarily after an abnormal kernel termination. A standard brief press of the power key does not reset the bootloader hardware state.

  1. Ensure the phone is disconnected from all USB cables and wall chargers.
  2. Press and hold the Power button continuously for at least 15 to 25 seconds without releasing it.
  3. Do not touch either the Volume Up or Volume Down buttons during this process.
  4. Once the screen goes completely black and the phone vibrates, release the Power button immediately.
  5. Allow the phone to initiate its standard boot sequence. If the system partition is healthy, the standard manufacturer logo will appear.

Inspect and Free Stuck Volume Rocker Buttons

Android devices enter Fastboot mode automatically when the Power button and Volume Down button are pressed simultaneously during startup. If dirt, moisture, or a tight phone case pinches the volume switch, the device will boot into Fastboot on every cycle.

  1. Remove any protective case, bumper, or skin from the phone chassis.
  2. Inspect the physical Volume Down and Volume Up buttons closely.
  3. Press both volume buttons repeatedly to test their tactile click feedback. If a button feels mushy, stuck, or does not depress with a distinct click, mechanical jamming is holding the electrical switch closed.
  4. Clean around the button edges using a wooden toothpick and a small drop of isopropyl alcohol to dissolve dried residue.
  5. Once the buttons move freely, hold down the Power button to reboot normally.

Navigate Fastboot Screen Options via Hardware Keys

Many modern Android bootloaders (including Google Pixel, OnePlus, and Xiaomi) feature an interactive on-screen menu directly within the Fastboot interface.

  1. Look at the top of the Fastboot screen. You will see a green or red navigation arrow with options like Start, Restart bootloader, Recovery mode, or Power off.
  2. Use the Volume Up and Volume Down buttons to cycle through the menu until Start (or Reboot System) is highlighted.
  3. Press the Power button once to confirm the selection.
  4. If the phone cycles back to Fastboot, navigate to Recovery mode and press Power. From the recovery menu, select Reboot system now.

Send the Fastboot Reboot Command via Computer

If physical buttons fail to navigate the bootloader interface, connecting the phone to a computer running Android Platform Tools bypasses hardware inputs.

  1. Download the official Android SDK Platform Tools (containing fastboot.exe) on Windows or macOS.
  2. Connect your Android phone to the computer using a high-quality USB-C data cable.
  3. Open Command Prompt or Terminal inside the extracted platform-tools directory.
  4. Verify that your computer detects the smartphone:
    fastboot devices
  5. If a serial number appears, send the direct reboot instruction:
    fastboot reboot
  6. The phone will exit Fastboot mode and attempt to boot into Android.

Wipe Cache and Perform a Factory Reset via Recovery

If corrupted system update files prevent the operating system from booting, resetting system partitions clears broken cache headers.

  • From the Fastboot screen, select Recovery Mode.
  • When the Android robot appears with “No command”, press and hold the Power button, then press Volume Up once and release both.
  • Select Wipe cache partition (if available) and confirm.
  • If the boot loop continues, select Wipe data / factory reset to restore factory firmware settings.

Get the best tech tips delivered straight to your inbox.

Join thousands of readers mastering Apple, Google, Microsoft, and Linux.