When you start a swimming workout or manually activate Water Lock from the Control Centre, your Apple Watch locks its touchscreen display to prevent accidental taps from water droplets. When Water Lock is active, a small blue or yellow water droplet icon appears at the top of the watch face, and touching the screen produces no response. Turning off Water Lock clears trapped moisture from the speaker and restores full touch functionality.
Unlocking the Apple Watch Screen
Deactivating Water Lock takes just a few seconds using the hardware controls on the side of the watch case.
- Ensure your Apple Watch is worn securely on your wrist or placed flat on a dry towel.
- Press and hold down the Digital Crown (the circular dial on the side of the watch).
- Keep holding the Digital Crown for approximately two to three seconds. A circular progress ring will fill up on the display.
- On older watchOS versions, turn (rotate) the Digital Crown continuously until the meter completes.
- Release the Digital Crown when you hear a sequence of distinct audio tones and see the Unlocked confirmation banner on the screen.
For more everyday battery and display optimisations on your wearable, explore our guide on how to turn off Always On display on Apple Watch.
Why Does the Apple Watch Play Loud Beeps?
The rhythmic humming and buzzing sounds played when Water Lock turns off are intentional. The watch acoustic system uses vibrating sound frequencies to physically eject moisture from the speaker chamber:
- Tiny droplets of water trapped inside the speaker grille can muffle incoming call audio or Siri responses.
- The vibrations force moisture droplets outward through the speaker slots.
- You can gently wipe the edge of the watch case with a soft, lint-free cloth once the ejection sequence completes.
Troubleshooting an Unresponsive Crown in Water Lock
If pressing and holding the Digital Crown fails to clear the water droplet lock:
- Dry the Watch: Excess surface water on the dial can impede mechanical recognition. Dry the case thoroughly with a microfibre cloth.
- Clean Foreign Debris: If you swam in salt water or chlorinated pools, gently rinse the watch under warm, slow-running fresh tap water for 15 seconds, rotating the crown to dislodge salt crystals or dried minerals.
- Force Restart: If the screen remains frozen, press and hold both the Digital Crown and the Side Button simultaneously for at least 10 seconds until the white Apple logo appears.