Powering on your Mac or waking it from sleep only to encounter a grey or black screen displaying the multilingual alert: ‘Your computer was restarted because of a problem. Press a key or wait a few seconds to continue starting up’ indicates a macOS kernel panic. When this message recurs upon every boot cycle, the Mac enters a reboot loop, preventing users from accessing the desktop or opening applications. Kernel panics represent low-level hardware or software faults that force the Darwin operating system kernel to abort execution to protect file integrity.
Why Does macOS Enter a ‘Restarted Because of a Problem’ Loop?
A kernel panic occurs when core operating system routines encounter an unrecoverable exception. Common triggers include:
- Corrupted Third-Party Kernel Extensions (KEXTs): Legacy drivers for audio interfaces, virtualization software, or deep-packet inspection antivirus tools incompatible with recent macOS updates.
- Peripheral Hardware and Thunderbolt Bus Faults: Defective USB-C docks, external SSD enclosures, or unshielded cables sending erroneous voltage signals across bus lines.
- Corrupted NVRAM or PRAM Memory Tables: Stale hardware device mappings stored in non-volatile RAM disrupting boot initialization.
- Damaged Login Items and LaunchDaemons: Background helper services attempting to access protected memory registers immediately upon desktop load.
- Defective RAM or Logic Board Component Failure: Physical memory cell degradation triggering CPU memory check panics.
Step 1: Disconnect All External Peripherals
External hardware devices are the leading source of unexpected bus-level kernel panics.
- Shut down your Mac completely by holding the Power button (or Touch ID sensor) for 10 seconds.
- Unplug all connected peripherals: external hard drives, USB flash drives, Thunderbolt monitors, hubs, printers, and audio interfaces.
- Retain only the official Apple power adapter connected to a wall socket (and an official wired keyboard/mouse if using a Mac mini, Studio, or Pro).
- Power on the Mac. If the system boots smoothly to the desktop, reconnect devices one by one to identify the faulty peripheral or cable.
Step 2: Boot into Safe Mode to Isolate Software Conflicts
Safe Mode prevents third-party kernel extensions and startup items from loading while conducting directory checks.
- On Apple Silicon Macs (M1, M2, M3, M4):
- Shut down the Mac.
- Press and hold the Power button until ‘Loading startup options’ appears.
- Select your startup disk (e.g. Macintosh HD).
- Press and hold the Shift key, then click Continue in Safe Mode.
- On Intel-based Macs:
- Turn on the Mac and immediately press and hold the Shift key.
- Release the Shift key when the login window appears.
- Once logged in, verify if the Mac operates stably without rebooting. If stable, the root cause is a third-party startup daemon or kernel extension.
Step 3: Remove Conflicting Login Items and Launch Daemons
Eliminate background software that initializes unverified system hooks during boot.
- Open System Settings from the Apple menu.
- Navigate to General > Login Items & Extensions.
- Under Open at Login, select third-party applications and click the minus (–) button.
- Scroll down to Allow in the Background and disable toggles for obsolete utilities, virtual audio drivers, and VPN managers.
- Open Finder, press Cmd + Shift + G, and navigate to:
/Library/LaunchDaemons - Examine the folder for
.plistfiles belonging to uninstalled or unrecognised software, move them to the Bin, and empty the Bin.
Step 4: Reset NVRAM / PRAM (Intel Macs Only)
Clearing non-volatile memory resets core hardware state tables and display configurations.
- Shut down your Intel Mac.
- Press the power button, then immediately press and hold Option + Command + P + R.
- Hold these keys for approximately 20 seconds until you hear the startup chime twice (or the Apple logo appears and disappears twice).
- Release the keys and allow the Mac to boot normally. (Note: Apple Silicon Macs perform automatic NVRAM verification during every boot cycle).
Step 5: Inspect the Kernel Panic Log via Console
Analysing the panic crash report identifies the specific process or extension responsible.
- Open Console from Applications > Utilities.
- In the left sidebar, click Crash Reports (or Diagnostic Reports).
- Look for log files ending in
.panic. - Click on the most recent panic log and examine the line labelled Kernel Extensions in backtrace or Mac OS name: Mac OS version.
- Identify any third-party identifier (e.g.,
com.displaylink...,com.avast..., orcom.parallels...) listed in the backtrace. - Uninstall the identified software package using the developer’s official uninstaller tool.