How to Fix iPad Stuck on Verifying Update Screen

Upgrading iPadOS over-the-air (OTA) via Settings occasionally causes the tablet to freeze indefinitely displaying a modal dialogue with a spinning gear: Verifying update.... Although the progress wheel may continue to rotate, the verification handshake never completes, preventing the device from rebooting into the firmware installation partition. This lockup happens when Apple’s cryptographic signature verification servers fail to validate the downloaded payload due to Wi-Fi drops, corrupted update blobs, or low internal storage headroom.

Perform a Hardware Forced Restart

Because the iPad’s touch digitiser and standard power slider are blocked during firmware verification, executing an abrupt hardware restart interrupts the stalled verification daemon safely.

  1. For iPads without a physical Home button (Face ID or Touch ID in Top button):
    • Press and quickly release the Volume Up button closest to the top edge.
    • Press and quickly release the Volume Down button furthest from the top edge.
    • Press and hold the Top power button continuously for 10 to 15 seconds.
    • Do not release when the display shuts off; release only when the Apple logo appears.
  2. For iPads with a physical Home button:
    • Press and hold both the Home button and the Top power button simultaneously.
    • Continue holding both buttons until the screen goes blank and the Apple logo illuminates, then release.

Once iPadOS reboots into the standard lock screen, the verification attempt is safely cancelled without causing firmware corruption.

Delete Corrupted Firmware Files and Re-Download

If an OTA update package was interrupted during transit, cryptographic hashes will not match Apple’s server certificates, resulting in an endless verification stall.

  1. Open Settings > General > iPad Storage.
  2. Wait for the device storage audit to populate.
  3. Scroll through the application list and locate iPadOS [Version Number].
  4. Tap the update file and select Delete Update.
  5. Confirm deletion when prompted.
  6. Restart your iPad, return to Settings > General > Software Update, and tap Download and Install over a stable Wi-Fi connection.

Update via Finder on Mac or Apple Devices App on Windows

When OTA verification fails consistently, performing the update through a tethered computer connection bypasses device-side signature extraction.

  1. Connect your iPad to a computer via an official USB-C or Lightning cable.
  2. On macOS Catalina or later, open Finder. On Windows or older macOS, open the Apple Devices app (or iTunes).
  3. Select your connected iPad in the sidebar navigation.
  4. In the General tab, click Check for Update.
  5. Click Download and Update. The computer downloads the entire uncompressed IPSW firmware package, validates the SHA-256 signatures locally, and safely installs it to the iPad.

Get the best tech tips delivered straight to your inbox.

Join thousands of readers mastering Apple, Google, Microsoft, and Linux.