How to Fix ‘Cellular Issue Detected’ Error on iPhone

Unlocking your iPhone only to be greeted by a persistent system notification stating: ‘Cellular Issue Detected’ or ‘Your iPhone is unable to make and receive calls or access cellular data until it has been updated’ leaves you completely disconnected from mobile networks. When this alert appears, an exclamation mark or ‘No Service’ replaces the standard cellular reception bars in the status bar. This issue can stem from carrier configuration desynchronisation, corrupted iOS baseband firmware updates, or physical SIM tray faults. Following systematic troubleshooting steps will help identify and resolve the issue.

Why Does iOS Display ‘Cellular Issue Detected’?

The iPhone uses a dedicated cellular baseband processor to manage communications between your SIM card and mobile cell towers. This warning is triggered when:

  • Baseband Modem Firmware Mismatch: An interrupted iOS software update that updated the main system software while the baseband modem firmware failed cryptographic verification.
  • Outdated Carrier Profile Settings: Network configuration bundles provided by your telecommunications provider that no longer match tower radio protocols.
  • Dirty or Damaged Physical SIM Card: Oxidation on SIM contact pads causing intermittent contact breaks with the internal SIM tray reader.
  • eSIM Profile State Corruption: Corrupted cryptographic certificates in the iPhone Secure Element for active eSIM lines.
  • Hardware Component Failure: Micro-fractures on the logic board’s baseband power management integrated circuit (PMIC) or RF transceiver chips following severe physical impacts.

Step 1: Check Modem Firmware Status in Settings

Verifying whether your iPhone can read its own baseband firmware helps distinguish between a simple configuration issue and a hardware fault.

  1. Open Settings > General > About.
  2. Scroll down to inspect the Modem Firmware entry.
  3. If a version number (such as 3.02.01) is visible, the cellular modem is functional and the issue is likely software-based.
  4. If the Modem Firmware field is completely blank, iOS cannot communicate with the cellular modem chip, indicating baseband corruption or hardware failure.

Step 2: Check for Pending Carrier Settings Updates

Mobile networks periodically push over-the-air carrier configuration bundles to support network bands and VoLTE upgrades.

  1. Connect your iPhone to a stable Wi-Fi network.
  2. Open Settings > General > About.
  3. Wait 15 to 30 seconds on this screen.
  4. If an update is available, a prompt will appear: ‘Carrier Settings Update: New settings are available. Would you like to update them now?’
  5. Tap Update and restart your iPhone.

Step 3: Remove and Clean Physical SIM Card or Re-add eSIM

A loose SIM tray or tarnished gold contacts will disrupt the cellular handshake.

  1. Turn off your iPhone.
  2. Insert a SIM ejector tool into the pinhole on the SIM tray to release the tray.
  3. Inspect the physical SIM card for scratches or dust. Gently wipe the gold contact surface using a clean, dry microfibre cloth.
  4. Reinsert the SIM tray firmly and power on the iPhone.
  5. For eSIM Users: Open Settings > Cellular, select your active eSIM plan, toggle Turn On This Line off for 15 seconds, and toggle it back on.

Step 4: Reset Network Settings

Resetting network settings clears corrupt APN profiles, cellular roaming preferences, and cellular cache files without erasing your personal apps or photos.

  1. Open Settings > General > Transfer or Reset iPhone.
  2. Tap Reset at the bottom of the screen.
  3. Select Reset Network Settings.
  4. Enter your device passcode and confirm the reset prompt.
  5. Your iPhone will reboot and rebuild its network stack. Note that this also removes saved Wi-Fi passwords, so you will need to reconnect to your Wi-Fi network.

Step 5: Perform a Full iOS Backup and Reinstall via Mac or PC

If the error followed an over-the-air iOS update, reinstalling the complete iOS image forces a clean flash of the baseband modem firmware.

  1. Connect your iPhone to a Mac (via Finder) or PC (via the Apple Devices app or iTunes).
  2. Perform a complete encrypted local backup of your device.
  3. Put your iPhone into Recovery Mode:
    • Press and quickly release Volume Up.
    • Press and quickly release Volume Down.
    • Press and hold the Side button until the Recovery Mode screen (cable pointing to a computer) appears.
  4. On your computer, select Update when prompted. This will attempt to reinstall iOS without erasing personal data.
  5. If Update fails, select Restore to wipe the device and flash the firmware cleanly, then restore your backup.

Following these diagnostic and recovery steps resolves baseband mismatches and restores voice calls, text messaging, and high-speed mobile data to your iPhone.

Get the best tech tips delivered straight to your inbox.

Join thousands of readers mastering Apple, Google, Microsoft, and Linux.