Attaching your Apple Pencil to the side of your iPad or plugging it in to charge—seeing the battery banner display 100% and Bluetooth report ‘Connected’—only to find that the Pencil will not write, draw, tap, or respond on the display glass halts creative and note-taking workflows. This perplexing issue affects Apple Pencil (1st gen, 2nd gen, USB-C, and Apple Pencil Pro) across iPadOS. When the pencil tip loosens, digitiser sensor layers encounter palm rejection locks, or Bluetooth low-energy communication daemons experience pairing state desynchronisation, the Pencil ceases registering on the display.
Why Does Apple Pencil Connect but Refuse to Draw?
An Apple Pencil communicating via Bluetooth while failing to register on the touchscreen is typically caused by physical or digitiser mismatches:
- Loose or Damaged Pencil Tip (Nib): The conductive screw-on tip becoming slightly loose, preventing capacitive sensor pins inside the pencil barrel from detecting screen contact.
- Bluetooth Low-Energy (BLE) Pairing State Desynchronisation: The iPad maintaining a stale pairing token that registers battery status while dropping stylus coordinates.
- Only Draw with Apple Pencil Setting Enabled: iPadOS configured to block finger drawing while specific drawing apps fail to receive stylus inputs.
- Screen Protector Interference: Thick tempered glass or matte screen protectors creating an excessive gap for pressure-sensitive digitiser sensors.
- Palm Rejection Sensor Lockups: iPadOS touch sub-processors becoming frozen in a perpetual touch-rejection state.
Step 1: Tighten the Apple Pencil Tip
A loose tip is responsible for more than 80% of unresponsive Apple Pencils.
- Gently grasp the white plastic tip of your Apple Pencil.
- Turn the tip clockwise to ensure it is threaded completely and securely into the barrel.
- Do not overtighten, but confirm there is no visible gap between the tip and the pencil body.
- If the tip is worn down, cracked, or shows the internal metal sensor pin, unscrew it counter-clockwise and replace it with a fresh genuine Apple Pencil tip.
Step 2: Unpair and Re-Pair the Apple Pencil in Bluetooth
Re-establishing the Bluetooth connection forces iPadOS to rebuild the hardware input pipeline.
- Open Settings on your iPad and tap Bluetooth.
- Locate Apple Pencil under My Devices.
- Tap the info icon (i) next to Apple Pencil.
- Tap Forget This Device and confirm.
- Turn Bluetooth off, wait 10 seconds, and turn Bluetooth back on.
- Re-pair the Pencil:
- Apple Pencil 2 / Pro: Snap it magnetically onto the long side of your iPad.
- Apple Pencil 1 / USB-C: Plug it into the charging port or connect via the USB-C adapter.
- Tap Pair when the on-screen prompt appears.
Step 3: Check ‘Only Draw with Apple Pencil’ Setting
Verify whether global iPadOS Apple Pencil settings are restricting drawing inputs.
- Open Settings and tap Apple Pencil.
- Locate the toggle for Only Draw with Apple Pencil.
- If enabled, toggle it off to test whether the issue is app-specific.
- Try writing in the native Notes app using a blank note to confirm hardware response.
Step 4: Force Restart Your iPad
A force restart clears temporary cache in the iPad touch digitiser sub-processor.
- For iPads without a Home button:
- Press and quickly release Volume Up.
- Press and quickly release Volume Down.
- Press and hold the Top / Power button until the Apple logo appears.
- Allow the iPad to reboot and test drawing.
Step 5: Inspect Screen Protector and Charge State
Ensure hardware accessories are not obstructing capacitive detection.
- Thick, low-quality tempered glass protectors can prevent delicate pressure sensors from contacting the display.
- If an Apple Pencil has been left at 0% battery for months, leave it charging continuously for at least 30 minutes to revive depleted lithium cells.
Tightening the pencil tip, repairing the Bluetooth connection, and force restarting the iPad resolves the ‘Apple Pencil connected but not drawing’ issue on iPadOS.