How to Fix ‘The Parameter Is Incorrect’ (0x80070057) on External Drives in Windows 11

Connecting an external USB hard drive, portable SSD, or memory card to a Windows 11 PC can suddenly present a location error dialogue: [Drive Letter]:\ is not accessible. The parameter is incorrect (frequently accompanied by system error code 0x80070057). When this error occurs, File Explorer cannot read the drive volume, displaying the disk as inaccessible or converted to a RAW filesystem format. Because Windows relies on strict sector boundaries and valid master file tables (MFT) to traverse directory trees, sudden device disconnections, power fluctuations, or bad NAND sectors cause parameter validation checks to fail.

Restoring access to your external drive without losing valuable files requires running non-destructive file system integrity scans, repairing bad sectors with Check Disk, updating storage controller drivers, and managing partition flags.

What Triggers ‘The Parameter Is Incorrect’ Error in Windows?

The parameter is incorrect prompt indicates that Windows storage APIs received invalid or contradictory partition parameters from the hardware controller. Common causes include:

  • Unsafe Device Removal: Unplugging an external hard drive or USB stick while an active write cache or background indexing operation was in progress corrupts the partition header.
  • Corrupted Master File Table (MFT) or FAT: The primary index table that tracks file clusters across the storage media has suffered sector degradation.
  • Bad Storage Sectors: Physical media deterioration on spinning platters or worn flash memory cells prevent Windows from reading volume metadata.
  • USB Port Power Deficiencies: Connecting power-hungry external mechanical hard drives to unpowered USB hubs or faulty front-panel ports causes voltage sags that corrupt communication packets.
  • Outdated Storage Controller Drivers: Incompatible USB 3.0 eXtensible Host Controller drivers mishandle SCSI/UASP storage command parameters.

Method 1: Scan and Repair the Drive Using CHKDSK

The command-line Check Disk utility can repair corrupted volume headers and recover readable cluster parameters without erasing user files:

  1. Insert your external hard drive into a direct motherboard USB port.
  2. Open File Explorer and note the exact drive letter assigned to the inaccessible drive (e.g., E:).
  3. Press Windows Key + X and select Terminal (Admin) or Command Prompt (Admin).
  4. Execute the following targeted sector and file system repair command:
    chkdsk E: /f /r /x

    (Replace E: with your actual external drive letter.)

  5. Parameter explanation:
    • /f fixes structural file system errors on the disk.
    • /r locates bad sectors and recovers readable information.
    • /x forces the volume to dismount first, releasing any background file locks.
  6. Allow the scan to complete through all stages. Depending on the size of the hard drive, this process can take from 15 minutes to several hours.
  7. Once completed, open File Explorer to verify that your drive is accessible and all folders are intact.

Method 2: Reinstall USB Controller Drivers in Device Manager

Corrupted USB bus controllers often transmit garbled hardware parameters to Windows:

  1. Press Windows Key + X and choose Device Manager.
  2. Scroll down and expand Universal Serial Bus controllers.
  3. Locate USB Mass Storage Device and your USB Root Hub (USB 3.0).
  4. Right-click each entry and select Uninstall device. Confirm the prompt.
  5. Unplug your external drive.
  6. Click Action > Scan for hardware changes in Device Manager, or restart your computer.
  7. Reconnect the external hard drive. Windows will reinstall clean driver instances and renegotiate hardware parameters automatically.

Method 3: Format the Drive if the File System Is Permanently RAW

If CHKDSK reports that The type of the file system is RAW. CHKDSK is not available for RAW drives, the partition table is destroyed beyond automated repair. If data recovery software has already salvaged your critical files, format the drive to restore usability:

  1. Press Windows Key + X and choose Disk Management.
  2. Locate your external drive in the bottom list.
  3. Right-click the partition and select Format….
  4. Choose NTFS (for exclusive Windows use) or exFAT (for cross-platform Windows and Mac compatibility).
  5. Ensure Perform a quick format is checked and click OK.

Get the best tech tips delivered straight to your inbox.

Join thousands of readers mastering Apple, Google, Microsoft, and Linux.