How to Fix Windows 11 Wi-Fi Keeps Disconnecting and Reconnecting

Working or streaming on a laptop or desktop PC running Windows 11 only to experience frequent Wi-Fi dropouts—where the network icon switches to a globe, disconnects, and reconnects seconds later—disrupts video meetings, file downloads, and gaming sessions. Often, this cycle repeats every few minutes, particularly when moving the laptop, resuming from sleep, or transferring high-bandwidth payloads. In Windows 11, wireless connectivity relies on the WLAN AutoConfig service (WlanSvc), dynamic frequency selection (DFS), and power management policies governing PCIe/USB wireless network interface cards (NICs). When power-saving profiles suspend Wi-Fi adapters during idle micro-states, driver roaming aggressiveness is set too high, or network stacks corrupt, Windows drops Wi-Fi associations. This tutorial outlines how to stabilise wireless connections in Windows 11.

What Causes Wi-Fi to Disconnect and Reconnect in Windows 11?

Maintaining a stable wireless link requires uninterrupted communication between hardware transceivers and Windows power plans. Common causes include:

  • Adapter Power Saving Suspension: Windows 11 cutting power to the wireless adapter when it detects brief idle periods to conserve battery.
  • Excessive Roaming Aggressiveness: The wireless card constantly disassociating to hunt for nearby access points with marginal signal improvements.
  • Outdated or Corrupted Wi-Fi Drivers: Generic or outdated Intel, Realtek, or MediaTek drivers failing modern WPA3/802.11ax handshakes.
  • Corrupted TCP/IP and Winsock Stacks: Stale routing tables or fragmented socket descriptors forcing network reconnect sequences.
  • Dual-Band (2.4 GHz vs 5 GHz) Band Steering Bouncing: Routers broadcasting identical SSIDs across 2.4 GHz and 5 GHz bands causing network cards to alternate frequencies endlessly.

Step 1: Disable Power Management Suspension on the Wi-Fi Adapter

Preventing Windows from turning off your wireless network adapter is the single most effective fix for recurring disconnects.

  1. Right-click the Start button on the taskbar and select Device Manager.
  2. Expand the Network adapters category.
  3. Right-click your wireless card (e.g. Intel Wi-Fi 6E AX211, Realtek RTL8822CE, or MediaTek Wi-Fi 6) and select Properties.
  4. Click on the Power Management tab at the top.
  5. Uncheck the box next to Allow the computer to turn off this device to save power.
  6. Click OK to apply changes.

Step 2: Adjust Roaming Aggressiveness and Preferred Band Settings

Tuning the wireless adapter’s internal roaming threshold prevents it from abandoning a stable Wi-Fi connection prematurely.

  1. In Device Manager, right-click your wireless adapter and select Properties again.
  2. Click on the Advanced tab.
  3. In the Property list, select Roaming Aggressiveness:
    • Change the Value from Medium or High to Lowest (or Medium-Low). This tells Windows to maintain its connection until signal is truly lost.
  4. Next, locate Preferred Band in the Property list:
    • Set the value to Prefer 5GHz band (or Prefer 6GHz band) to avoid hopping back and forth to slower 2.4 GHz frequencies.
  5. Click OK to save the configuration.

Step 3: Set Wi-Fi Power Plan to Maximum Performance

Ensuring that Windows power plans supply full voltage to wireless hardware prevents low-power dropouts.

  1. Press Win + R, type control powercfg.cpl, and press Enter to open Power Options.
  2. Click Change plan settings next to your active power plan.
  3. Click Change advanced power settings.
  4. In the Power Options window, expand Wireless Adapter Settings > Power Saving Mode.
  5. Ensure both On battery and Plugged in are set to Maximum Performance.
  6. Click Apply and then OK.

Step 4: Execute a Complete TCP/IP and Winsock Reset

Flushing network sockets and routing tables eliminates corrupted IP state machines.

  1. Press Win + S, type cmd, and select Run as administrator.
  2. Execute the following commands sequentially, pressing Enter after each:
    netsh winsock reset
    netsh int ip reset
    ipconfig /release
    ipconfig /renew
    ipconfig /flushdns
  3. Restart your computer immediately after running the commands to finalise socket rebuilds.

Step 5: Forget and Reconnect to the Wi-Fi Network

Re-associating with your wireless router generates a clean cryptographic handshake token.

  1. Open Settings > Network & internet > Wi-Fi.
  2. Click Manage known networks.
  3. Find your home or office Wi-Fi network and click Forget.
  4. Turn Wi-Fi off, wait 5 seconds, and turn it back on.
  5. Select your Wi-Fi network, enter the security passphrase, and check Connect automatically.

Windows 11 Wi-Fi Disconnect Troubleshooting Summary

Identified Cause Diagnostic Indicator Remediation Step
Adapter power conservation Drops when idle or on battery Uncheck Allow computer to turn off device
Network hopping between APs Drops every few minutes while moving Set Roaming Aggressiveness to Lowest
2.4GHz / 5GHz frequency oscillation Speed drops before disconnect Configure Preferred Band to Prefer 5GHz
Corrupted socket tables Reconnection requires manual click Execute netsh winsock reset in Command Prompt

Disabling power-saving suspension and adjusting roaming aggressiveness guarantees stable, uninterrupted Wi-Fi connectivity in Windows 11.

Get the best tech tips delivered straight to your inbox.

Join thousands of readers mastering Apple, Google, Microsoft, and Linux.