How to Fix Second Router Not Detected in Windows 11 Network

Adding a secondary router or Wi-Fi mesh access point to an existing home or office network expands wireless coverage and eliminates dead zones. However, connecting a second router often leads to confusing network anomalies in Windows 11: the router fails to appear in Network Discovery, connected network drives or printers become unreachable, or Windows reports No Internet, secured due to severe IP routing conflicts.

Why Is the Second Router Not Detected or Causing Conflicts?

Operating two consumer routers on the same physical local network creates routing ambiguities if both devices attempt to manage the same network layer. Key causes include:

  • Double NAT (Network Address Translation) and Subnet Conflicts: Both routers issuing conflicting DHCP leases on the same subnet (such as 192.168.1.1).
  • Secondary Router in Routing Mode Instead of Access Point (AP) Mode: Running routing firewalls on the secondary device isolates connected clients from the primary network.
  • Windows Network Profile Set to Public: Windows 11 blocks Network Discovery, NetBIOS, and LLTD device enumeration when connected to a network classified as Public.
  • Ethernet Cable Plugged into WAN Instead of LAN Port: Connecting the uplink Ethernet lead into the second router’s WAN (Internet) port while in standard router mode.
  • Function Discovery Services Disabled in Windows: Windows background services responsible for locating LAN hardware remaining stopped.

Method 1: Change Windows Network Profile to Private

Windows 11 disables local network hardware discovery automatically when a network connection is configured as Public.

  1. Press Windows Key + I to open Settings.
  2. Click on Network & internet in the left sidebar.
  3. Click on Wi-Fi or Ethernet depending on your active connection.
  4. Select your current network connection name to access properties.
  5. Under Network profile type, change the selection from Public network to Private network.
  6. Close Settings, open File Explorer, and click Network on the left pane to verify that devices now appear.

Method 2: Configure Secondary Router as an Access Point (AP Mode)

To eliminate Double NAT and allow all devices to communicate on a single unified local subnet, configure the second router in Access Point mode.

  1. Disconnect the second router from the primary router temporarily.
  2. Connect your PC directly to the second router via an Ethernet cable or Wi-Fi.
  3. Open a web browser and navigate to the second router’s web admin dashboard (commonly 192.168.0.1 or 192.168.1.1).
  4. Log in with your administrator credentials.
  5. Navigate to Advanced Settings > Operation Mode (or Wireless Settings).
  6. Change the mode from Router Mode to Access Point (AP) Mode.
  7. Save and reboot the second router. Connect the Ethernet uplink cable from a LAN port on the primary router directly to the designated port on the second router.

Method 3: Disable DHCP Server on the Second Router (LAN-to-LAN Setup)

If your second router does not offer an automated AP Mode toggle, manually disabling its DHCP server avoids IP allocation conflicts.

  1. Access the second router’s admin interface.
  2. Navigate to LAN Settings or Network Settings.
  3. Assign the second router a static IP address within the primary router’s subnet, outside its DHCP pool (for example, if the primary router is 192.168.1.1, assign 192.168.1.2).
  4. Locate the DHCP Server setting and toggle it to Disabled.
  5. Save settings and reboot the router.
  6. Connect the Ethernet cable from a LAN port on the primary router to a LAN port (not WAN) on the second router.

Method 4: Enable Network Discovery and Function Discovery Services

Ensure that Windows 11 services required for broadcasting and discovering network hardware are actively running.

  1. Press Windows Key + R, type services.msc, and press Enter.
  2. Locate Function Discovery Provider Host, right-click it, and choose Properties. Set Startup type to Automatic and click Start.
  3. Locate Function Discovery Resource Publication, set Startup type to Automatic, and click Start.
  4. Locate SSDP Discovery and ensure it is also set to Automatic.
  5. Restart your computer to allow full network device discovery.

Get the best tech tips delivered straight to your inbox.

Join thousands of readers mastering Apple, Google, Microsoft, and Linux.