Clicking the Wi-Fi icon in the macOS menu bar only to see an empty dropdown displaying the warning “Wi-Fi: No hardware installed” completely cuts off wireless connectivity. When this error occurs, macOS fails to detect or communicate with the internal AirPort or Broadcom/Apple wireless network card over the PCIe bus. While physical hardware failure can cause this condition, it is frequently triggered by corrupted System Configuration property lists (plists), confused System Management Controller (SMC) power states, or stale NVRAM hardware caches following operating system updates.
Reset the System Management Controller (SMC)
The SMC manages low-level hardware power allocation on Intel-based Macs, including delivering power rails to the internal wireless PCIe controller.
- For Intel MacBooks with Non-Removable Batteries:
- Shut down your Mac completely.
- On the built-in keyboard, press and hold Shift + Control + Option on the left side, then press and hold the Power button (or Touch ID).
- Hold all four keys down simultaneously for 10 seconds.
- Release all keys, then press the Power button once to turn on your Mac.
- For Intel Desktop Macs (iMac, Mac mini):
- Shut down the Mac and unplug the power cord.
- Wait 15 seconds, plug the power cord back in, wait 5 seconds, and press the Power button.
- For Apple Silicon Macs (M1/M2/M3/M4):
- Apple Silicon chips handle power management internally; simply performing a complete shutdown, waiting 30 seconds, and powering on executes a full hardware reset.
Reset NVRAM / PRAM (Intel Macs)
Non-Volatile Random-Access Memory stores hardware device mapping tables. Corrupted NVRAM keys prevent macOS from enumerating the Wi-Fi network interface.
- Shut down your Intel Mac.
- Press the Power button, then immediately press and hold Option + Cmd + P + R simultaneously.
- Keep holding the four keys for approximately 20 seconds until the Mac restarts and chimes a second time (or the Apple logo flashes twice).
- Release the keys and allow macOS to boot. Check whether the Wi-Fi icon detects wireless networks.
Delete Corrupted Network System Configuration Files
macOS stores local network device descriptors in central plist files inside the Library directory. Deleting corrupted plists forces macOS to generate fresh hardware configuration files upon reboot.
- Open Finder.
- Click Go > Go to Folder… in the top menu bar (or press Shift + Cmd + G).
- Paste the following directory path and press Enter:
/Library/Preferences/SystemConfiguration/ - Locate and move the following files to a temporary backup folder on your desktop (or delete them):
com.apple.airport.preferences.plistcom.apple.network.identification.plistcom.apple.wifi.message-tracer.plistNetworkInterfaces.plistpreferences.plist
- Enter your administrator password to authorize the change.
- Restart your Mac. Upon rebooting, macOS will redetect the internal AirPort card and build pristine configuration files.
Run Apple Diagnostics Hardware Test
If software resets fail to restore the Wi-Fi adapter, running Apple Diagnostics determines whether the physical Wi-Fi card or logic board ribbon cable has failed.
- Disconnect all external peripherals except the power adapter.
- On Apple Silicon Macs: Shut down, then press and hold the Power button until “Loading startup options” appears, then press Cmd + D.
- On Intel Macs: Restart and immediately press and hold the D key until the diagnostics screen appears.
- Note any error reference codes: codes beginning with CNW (such as
CNW001,CNW007, orCNW008) confirm physical hardware faults in the Wi-Fi module requiring Apple repair.