How to Fix ‘The File or Directory Is Corrupted and Unreadable’ (Error 0x80070570) in Windows 11

Opening a folder, copying a document, or running an application on an external hard drive, USB flash drive, or secondary SSD in Windows 11 can be abruptly interrupted by an error dialogue stating: “The file or directory is corrupted and unreadable” accompanied by Win32 system error code 0x80070570 (ERROR_FILE_CORRUPT). This notification indicates that the operating system can see the file name in the directory listing, but the underlying file system allocation pointers or Master File Table (MFT) records linking to the physical data clusters on disk are severely damaged.

Why Does Error 0x80070570 Occur?

Whether using NTFS, exFAT, or FAT32 file systems, Windows maintains an index table that maps file names to physical disk sectors. Error 0x80070570 occurs when:

  • Unsafe Device Removal (Dirty Bit Set): Unplugging a USB drive or portable SSD while write-caching was actively committing changes, leaving directory pointers in an incomplete, corrupted state.
  • Bad Sectors on Storage Media: Physical degradation or magnetic platter damage on an aging hard drive making sector clusters unreadable by the disk read heads.
  • Sudden Power Loss or System Crash: A sudden power outage or Windows Blue Screen (BSOD) while writing metadata to the MFT or File Allocation Table.
  • Faulty USB Hub or Cable: Signal degradation over an unpowered USB hub or frayed cable causing packet drops during file transfer operations.

Step 1: Run Check Disk (CHKDSK) via Elevated Command Prompt

The native Windows Check Disk utility is the most effective tool to repair corrupted file system allocation tables and recover orphaned directory indices.

  1. Identify the exact drive letter of the problematic drive in File Explorer (e.g., E: or F:).
  2. Press Windows Key + S, type cmd, and click Run as administrator.
  3. Execute the following command, replacing X: with your actual drive letter:
    chkdsk X: /f /r
    (Example: chkdsk E: /f /r)
  4. If the volume is in use and Windows asks to dismount the drive, type Y and press Enter.
  5. Allow CHKDSK to complete all five verification stages (examining file records, index verification, security descriptors, and locating bad sectors).
  6. Once complete, open File Explorer and verify if the folder is now accessible.

Step 2: Scan the Drive via Windows Error Checking Tool

If you prefer a graphical interface to initiate volume repairs:

  1. Open File Explorer and click This PC.
  2. Right-click the problematic drive and choose Properties.
  3. Select the Tools tab at the top.
  4. Under the Error checking section, click the Check button.
  5. Click Scan and repair drive. Windows will schedule a targeted volume repair pass.

Step 3: Connect Storage to Direct Motherboard Ports

Transient communication errors over external USB hubs can generate false corruption flags.

  1. Safely disconnect the external storage drive.
  2. Unplug any unpowered USB splitters or extension cables.
  3. Connect the drive directly into a rear USB 3.0/3.1 port situated directly on your PC motherboard (or directly into the chassis port on a laptop).
  4. Test accessing the file. Direct host ports provide stable 5V power and lower signal attenuation.

Step 4: Use Windows File Recovery / Data Recovery for Unfixable Sectors

If CHKDSK reports that the Master File Table is unrecoverable, do not format the drive immediately. Use recovery tools to extract raw data clusters.

  1. Install the official Windows File Recovery tool from the Microsoft Store.
  2. Open Command Prompt (Admin) and run a targeted recovery query:
    winfr X: C:\RecoveredFiles /regular
    (Where X: is the corrupted source drive and C:\RecoveredFiles is a healthy destination folder.)
  3. Once your important documents are retrieved, format the corrupted drive cleanly with NTFS before returning it to active duty.

Get the best tech tips delivered straight to your inbox.

Join thousands of readers mastering Apple, Google, Microsoft, and Linux.