How to Fix ‘We Couldn’t Create a New Partition or Locate an Existing One’ in Windows 11

Performing a clean installation of Windows 11 using a bootable USB flash drive can abruptly halt at the storage drive selection screen with an error banner: ‘We couldn’t create a new partition or locate an existing one. For more information, see the Setup log files.’ Clicking ‘New’ or ‘Next’ repeatedly fails to advance the installer, leaving users unable to select their NVMe SSD or hard drive to install the operating system. This error occurs when the Windows Setup boot environment confuses your bootable USB flash drive with the primary installation disk or encounters partition table metadata inconsistencies.

Why Does Windows Setup Fail to Create or Locate a Partition?

The Windows 11 Preinstallation Environment (WinPE) must determine which physical disk controller should receive the active Master Boot Record (MBR) or EFI System Partition (ESP). Frequent causes of this error include:

  • USB Drive Enumeration Priority: The motherboard BIOS/UEFI enumerates the bootable USB installer as ‘Disk 0’ while designating your internal SSD as ‘Disk 1’, confusing the installer’s bootloader allocation.
  • Multiple Connected Storage Drives: Secondary internal SATA hard drives, external backup disks, or SD card readers interfering with partition allocation.
  • Corrupted or Mixed GPT/MBR Partition Tables: Residual partition headers from previous Linux or Windows installations preventing clean GPT conversion.
  • Incorrect USB Creation Format: Bootable USB media prepared in legacy MBR/BIOS mode attempting to install onto a modern UEFI system requiring GPT.
  • RAID / Intel VMD Controller Lockout: Storage controllers requiring specific Intel Rapid Storage Technology (IRST) or AMD RAID drivers to expose NVMe volumes to WinPE.

Step 1: Disconnect All Secondary Drives and Peripheral Peripherals

Ensure that Windows Setup detects only one physical internal target disk.

  1. Turn off your computer completely.
  2. Unplug all external USB hard drives, flash storage keys, SD cards, and secondary USB devices (keep only your bootable Windows 11 USB installer, keyboard, and mouse connected).
  3. If your desktop PC contains secondary SATA storage drives or mechanical hard disks, temporarily disconnect their SATA data cables.
  4. Power on the PC, boot back into the Windows 11 installer, and test if the installer now accepts partition creation.

Step 2: Use Diskpart to Clean and Format the Drive Manually

Wiping corrupt partition headers directly in WinPE guarantees a pristine target for the installer.

  1. On the Windows Setup screen where the error occurs, press Shift + F10 (or Shift + Fn + F10 on laptops) to launch the administrative Command Prompt.
  2. Type diskpart and press Enter.
  3. Type list disk and press Enter. Identify your primary internal target drive (e.g. Disk 0 based on size).
  4. Type select disk 0 (replace ‘0’ with your actual target SSD number).
  5. Type clean and press Enter to wipe all corrupted partition structures.
  6. Convert the disk to the modern UEFI standard:
    convert gpt
  7. Next, create a primary partition:
    create partition primary size=100000
    (or omit size=... to allocate the entire drive).
  8. Format the volume with NTFS:
    format fs=ntfs quick
  9. Type assign, then type exit twice to close Diskpart and Command Prompt.
  10. Click Refresh on the drive selection window, select the newly formatted partition, and click Next.

Step 3: The USB Installer Unplug Trick (Resolving Disk 0 Enumeration)

If BIOS assigns Disk 0 to your USB stick, copying temporary setup files to the SSD and re-inserting the drive bypasses the installer bug.

  1. In the Windows Setup drive selection screen, press Shift + F10.
  2. Find the drive letters assigned to your USB installer and your internal drive:
    diskpart
    list volume
    exit
  3. Assume your USB drive is D: and your internal drive is C:. Copy the setup files:
    xcopy D:\* C:\ /e /h /k
  4. Make the internal drive bootable:
    bootsect.exe /nt60 C: /mbr
  5. Unplug the USB flash drive physically from the computer.
  6. Exit Command Prompt, close the installer window by clicking the red X, and confirm the restart prompt.
  7. The computer will boot directly from the internal SSD and complete installation cleanly.

Step 4: Configure UEFI and Disable Legacy CSM Boot

Ensure your motherboard firmware is configured strictly for modern UEFI storage.

  1. Reboot your computer and press the BIOS key (typically Del, F2, or F12).
  2. Navigate to the Boot configuration menu.
  3. Ensure Boot Mode is set to UEFI Only (disable Legacy or CSM Support).
  4. Save changes and exit (F10).

Get the best tech tips delivered straight to your inbox.

Join thousands of readers mastering Apple, Google, Microsoft, and Linux.