How to Fix ‘WHEA_UNCORRECTABLE_ERROR’ (0x00000124) in Windows 11

An abrupt system crash accompanied by a Blue Screen of Death (BSOD) displaying the stop code: ‘WHEA_UNCORRECTABLE_ERROR’ or bug check code 0x00000124 is one of the most critical hardware alerts in Windows 11. WHEA stands for Windows Hardware Error Architecture. Unlike driver-induced software crashes, WHEA errors are triggered directly by physical hardware components (such as the CPU, motherboard chipset, PCIe bus, or NVMe solid-state drive) reporting an uncorrectable hardware fault to the operating system. Because continuing execution would risk permanent file system corruption or data loss, Windows immediately halts the machine.

What Causes WHEA_UNCORRECTABLE_ERROR in Windows 11?

Bug check 0x00000124 indicates that the processor detected an unrecoverable hardware exception via Machine Check Architecture (MCA). Triggers include:

  • Unstable CPU Overclocking or Undervolting: Insufficient core voltage (Vcore) during dynamic load transitions causing processor calculation errors.
  • Thermal Throttling and Overheating: CPU or GPU temperatures exceeding critical junction limits (Tjunction) due to dried thermal paste or failing liquid cooler pumps.
  • Failing NVMe SSD or PCIe Storage Controller: Defective NAND flash, loose M.2 slots, or PCIe link state dropouts failing I/O transactions.
  • Outdated Motherboard BIOS/UEFI Firmware: Incompatible CPU power management microcode or PCIe 4.0/5.0 bus protocol handshake errors.
  • Degraded Power Supply Unit (PSU): Inadequate voltage rail regulation causing 12V or 5V rail drops under heavy load.

Step 1: Disable CPU and RAM Overclocking / Undervolting

Restoring stock CPU voltages and clock multipliers eliminates the most common cause of WHEA machine check exceptions.

  1. Reboot your PC and press Del or F2 to enter UEFI BIOS.
  2. Navigate to Overclocking settings (e.g. Precision Boost Overdrive (PBO), Intel Extreme Tuning, or Curve Optimizer).
  3. Reset all voltages, multipliers, and load-line calibrations to Auto / Default.
  4. Disable XMP / DOCP / EXPO temporarily to ensure memory bus stability.
  5. Save changes and reboot into Windows.

Step 2: Monitor Thermal Temperatures Under Load

Thermal degradation forces CPU cores into unstable states that trigger WHEA exceptions.

  1. Download a trusted hardware monitor such as HWiNFO64 or Core Temp.
  2. Observe CPU idle temperatures (normal range: 35°C to 50°C).
  3. Run a moderate workload; if CPU core temperatures rapidly surge past 95°C to 100°C, inspect your CPU cooling solution.
  4. Clean dust from radiators and fans, verify cooler mounting pressure, and replace aged thermal paste with high-conductivity compound.

Step 3: Update Motherboard BIOS / UEFI Firmware

Motherboard manufacturers frequently release microcode updates to resolve PCIe link drops and voltage instabilities with modern processors.

  1. Press Win + R, type msinfo32, and press Enter.
  2. Note your BaseBoard Product (motherboard model) and BIOS Version/Date.
  3. Visit the official manufacturer support page (e.g. ASUS, MSI, Gigabyte, ASRock) and download the latest stable BIOS.
  4. Copy the firmware file to a USB flash drive and flash the BIOS using the motherboard’s built-in utility (e.g. EZ Flash or M-Flash).

Step 4: Check NVMe SSD Health and Reseat M.2 Drives

PCIe errors originating from secondary NVMe drives commonly trigger WHEA 0x124 crashes.

  1. Download manufacturer SSD diagnostic software (such as Samsung Magician, Crucial Storage Executive, or CrystalDiskInfo).
  2. Review SMART attributes, paying specific attention to Media and Data Integrity Errors and Critical Warning flags.
  3. Power down your PC, disconnect power, open the chassis, and remove your M.2 NVMe SSD.
  4. Clean the gold contacts gently with isopropyl alcohol, ensure thermal pads make proper contact with the heatsink, and reseat the SSD firmly into the M.2 slot.

Step 5: Inspect WHEA-Logger Events in Event Viewer

Windows Event Viewer records the exact hardware source responsible for the error.

  1. Press Win + X and select Event Viewer.
  2. Navigate to Custom Views > Administrative Events.
  3. Look for warning or error events sourced from WHEA-Logger (Event ID 1, 18, 19, or 20).
  4. Double-click the event:
    • Event ID 18 typically indicates a CPU core cache hierarchy or bus interconnect error.
    • Event ID 17 points to a PCIe Root Port or NVMe controller issue.

Disabling overclocking profiles, updating motherboard BIOS microcode, checking thermal thresholds, and testing NVMe drive health eliminates WHEA_UNCORRECTABLE_ERROR blue screens in Windows 11.

Get the best tech tips delivered straight to your inbox.

Join thousands of readers mastering Apple, Google, Microsoft, and Linux.