How to Fix iPad Stuck in Recovery Mode

Powering on your iPad or performing an iPadOS software update only to find the screen stuck on a black background displaying an icon of a computer cable pointing toward a laptop with the URL: “support.apple.com/ipad/restore” indicates your tablet is trapped in Recovery Mode. In Apple’s iPadOS boot architecture, Recovery Mode (iBoot) is a low-level diagnostic environment designed to allow device restoration when the primary iOS/iPadOS operating system kernel cannot pass cryptographic signature checks or encounters corrupted partition tables. While entering Recovery Mode is normal during deliberate firmware updates, getting stuck in an endless recovery boot loop typically stems from interrupted updates, failed jailbreaks, depleted battery power during installation, or software regressions. This guide explains how to force your iPad out of recovery mode without losing your personal data.

What Causes an iPad to Get Stuck in Recovery Mode?

An iPad enters an unprompted recovery boot loop due to several hardware and software triggers:

  • Interrupted iPadOS Software Updates: The iPad running out of battery charge or losing Wi-Fi connectivity during system file installation.
  • Insufficient Free Storage During Update: The iPad attempting to unpack a multi-gigabyte iPadOS update package with less than 2–3 GB of available flash memory.
  • Damaged or Corrupted System Files: Critical kernel files or bootloader records failing cryptographic signature verification during startup.
  • Stuck Hardware Buttons: A physically jammed Power or Volume button holding down hardware recovery combinations during boot.
  • Hardware Component Degradation: A failing NAND flash memory chip or corroded Lightning/USB-C charging port board.

Method 1: Force Exit Recovery Mode Using Hardware Buttons

Before connecting to a computer, you can instruct the iBoot bootloader to attempt a standard reboot using hardware keys.

  1. For iPads Without a Home Button (iPad Pro, iPad Air 4th/5th/M2, iPad mini 6th/7th, iPad 10th gen):
    • Press and quickly release the Volume Up button (nearest to the top edge).
    • Press and quickly release the Volume Down button.
    • Press and hold the Top / Power button.
    • Continue holding the button continuously (for approximately 15–20 seconds). Ignore the recovery screen when it flickers.
    • Release the button only when the white Apple logo appears on screen.
  2. For iPads With a Physical Home Button (iPad 9th gen and earlier, iPad Air 3, iPad mini 5):
    • Press and hold both the Home button and the Top / Power button simultaneously.
    • Hold both buttons for 10–15 seconds until the screen turns black and the Apple logo appears, then release both keys.

Method 2: Update iPadOS via Mac Finder or Windows Apple Devices App

If hardware reboot returns you directly to the restore screen, instructing a computer to “Update” reinstalls iPadOS while leaving your photos, apps, and documents intact.

  1. Connect your iPad to a computer using an original Apple USB-C or Lightning cable.
  2. Open Finder on macOS Catalina or later (or the Apple Devices app / iTunes on Windows).
  3. Your computer detects the iPad and displays an alert stating: “There is a problem with the iPad that requires it to be updated or restored.”
  4. Click Update (do NOT click Restore).

    Crucial distinction: Selecting “Update” re-downloads the official iPadOS IPSW firmware and reinstalls the operating system without wiping user data. Selecting “Restore” erases the tablet completely.

  5. Follow the on-screen prompts to accept the license terms. Your computer begins downloading the firmware package.
  6. Note: If the download takes longer than 15 minutes, your iPad may automatically exit recovery mode. Simply let the computer finish downloading, then reconnect the iPad and click Update again.

Method 3: Perform a DFU Mode Clean Restore (Last Resort)

If system files are irreparably damaged and Update fails, Device Firmware Upgrade (DFU) mode performs a low-level factory flash.

  1. Ensure your iPad is connected to your computer with Finder or iTunes open.
  2. For iPads without a Home button:
    • Press Volume Up, then Volume Down, then hold the Power button until the screen goes black (3 seconds).
    • While still holding Power, press and hold Volume Down for 5 seconds.
    • Release Power while continuing to hold Volume Down for another 10 seconds.
    • The screen must remain completely black. If the Apple logo or recovery cable appears, repeat the steps.
  3. Finder alerts you that it has detected an iPad in recovery mode. Click Restore iPad to flash clean firmware.

iPad Recovery Mode Diagnostic Matrix

Recovery Behavior Probable Cause Target Action
Occurred right after iPadOS update Corrupted update package cache Connect to Mac/PC and choose Update in Finder
Loop repeats immediately after reboot Failed iBoot signature verification Perform hardware force restart sequence
Computer fails to recognise iPad Dirty USB-C port or faulty cable Clean port with wooden pick and use OEM cable
Finder throws Error 4013 or 4005 NAND flash or USB controller fault Try DFU restore or consult Apple Authorized Service

Using the hardware force restart key combination or executing a non-destructive Finder Update safely rescues your iPad from recovery mode.

Get the best tech tips delivered straight to your inbox.

Join thousands of readers mastering Apple, Google, Microsoft, and Linux.