Turning on your iPad or applying an iPadOS software update only for the screen to freeze indefinitely on the white Apple logo or flash in a continuous restart loop prevents device startup and access to apps. In iPadOS, the boot sequence initialises low-level hardware firmware (iBoot), mounts the encrypted APFS system container, and verifies kernel integrity before launching SpringBoard. When an interrupted operating system update, corrupted file system metadata, depleted battery voltage, or internal flash memory saturation halts the bootloader, the iPad hangs on the Apple logo. This tutorial outlines how to execute a hardware force restart, invoke computer recovery mode, and reinstall iPadOS without wiping your personal files.
Why Does an iPad Get Stuck on the Apple Logo?
Boot loops and frozen logo screens stem from both software initialization failures and hardware power faults:
- Interrupted iPadOS Software Updates: The iPad battery running out during an over-the-air (OTA) update, leaving core system libraries partially flashed.
- Low Available Internal Storage: Less than a few hundred megabytes of free space remaining, preventing iPadOS from creating temporary memory swap files during boot.
- Corrupted APFS Filesystem Records: Damaged system partition structures preventing the kernel from mounting the root directory.
- Failing Battery or Charging Port Hardware: Insufficient power delivery failing to satisfy the boot sequence current surge.
- Beta Profile or Jailbreak Conflicts: Unsigned kernel extensions or damaged launch daemons halting the startup sequence.
Method 1: Force Restart the iPad
A hardware force restart cuts power to the memory controller and forces the iPad processor to clear temporary CPU registers and reboot cleanly.
For iPads without a Home Button (iPad Pro, iPad Air 4th gen+, iPad mini 6th gen+, iPad 10th gen+):
- Press and quickly release the Volume Up button (closest to the top button).
- Press and quickly release the Volume Down button (farthest from the top button).
- Press and hold the Top (Power) button.
- Keep holding the button for roughly 10 to 15 seconds until the screen turns black and the Apple logo reappears, then release.
For iPads with a physical Home Button (iPad 9th gen and earlier):
- Press and hold both the Home button and the Top (Power) button simultaneously.
- Keep holding both buttons for at least 10 seconds until the Apple logo disappears and reappears on the screen.
Method 2: Connect to a Wall Charger for 30 Minutes
If an iPad battery has degraded significantly, it may lack the peak amperage required to complete the power-intensive boot sequence.
- Connect your iPad to its original Apple power adapter (preferably 20W or higher) and certified USB-C or Lightning cable.
- Plug the charger directly into a reliable wall socket (avoid computer USB ports or unpowered hubs).
- Leave the device untouched for at least 30 minutes.
- Attempt a force restart while the iPad remains plugged into the power source.
Method 3: Reinstall iPadOS via Recovery Mode (Preserving Data)
Using a Mac or Windows PC to reinstall iPadOS rewrites fresh system firmware without deleting personal photos, documents, or apps.
- Connect your iPad to a computer running macOS (via Finder) or Windows (via the Apple Devices app or latest iTunes) using a reliable USB cable.
- Put your iPad into Recovery Mode:
- For iPads without a Home button: Press and quickly release Volume Up. Press and quickly release Volume Down. Press and hold the Top button until the recovery screen (showing a computer and charging cable) appears. Do not release when you see the Apple logo.
- For iPads with a Home button: Press and hold both the Home and Top buttons until the recovery mode screen appears.
- On your computer, a prompt will appear stating: “There is a problem with the iPad that requires it to be updated or restored.”
- Click Update (do NOT click Restore, as Restore erases all data).
- Your computer will download clean iPadOS firmware and flash the system partition while keeping your data intact.
Method 4: Perform a DFU Restore (Final Software Resort)
If standard Recovery Mode fails to complete, Device Firmware Upgrade (DFU) mode bypasses iBoot to completely repartition the internal flash drive.
- Connect the iPad to your computer.
- Enter DFU mode by holding the Top button for 3 seconds, then holding Top + Volume Down for 10 seconds, then releasing Top while holding Volume Down for another 8 seconds until the screen stays completely black (if the Apple logo or recovery graphic appears, repeat the process).
- Finder or iTunes will report an iPad in recovery state with a black display.
- Click Restore iPad to perform a clean factory installation.