How to Share Audio Between Two Pairs of AirPods on iPhone and iPad

Watching a film or listening to music with someone else usually meant sharing a single pair of earphones, splitting the stereo channels and listening with one earbud each. Apple’s Audio Sharing feature eliminates this limitation entirely by allowing two people to connect their own sets of AirPods or compatible Beats headphones to a single iPhone or iPad simultaneously.

Both listeners receive complete stereo sound, and each person retains independent volume control directly from their headphones or the device’s Control Centre. This guide walks you through the hardware requirements, connection steps, volume management, and troubleshooting tips to get Audio Sharing working smoothly on your device.

Supported Devices and Headphones for Audio Sharing

Audio Sharing relies on Apple’s custom wireless chips (the H1, H2, and W1 processors) and modern Bluetooth audio protocols. Before starting, confirm that your devices support the feature.

Compatible iPhones and iPads

  • iPhone: iPhone 8 and all subsequent models running iOS 13 or later.
  • iPad: iPad Pro (all models), iPad Air (3rd generation and later), iPad mini (5th generation and later), and standard iPad (5th generation and later) running iPadOS 13 or later.
  • iPod touch: 7th generation running iOS 13 or later.

Compatible Wireless Headphones

  • AirPods (all generations: 1st, 2nd, 3rd, and 4th generation).
  • AirPods Pro (1st and 2nd generation).
  • AirPods Max.
  • Beats Fit Pro, Powerbeats Pro, Beats Solo Pro, Beats Solo 4, Beats Studio Pro, Powerbeats (2020), BeatsX, and Beats Flex.

Audio Sharing is not supported on Mac computers or Apple Watch models, though you can stream shared audio from an Apple TV 4K running tvOS 14 or later.

How to Connect a Second Pair of AirPods to iPhone or iPad

Before initiating Audio Sharing, ensure that your primary pair of AirPods is already connected to your iPhone or iPad and actively playing audio.

Method 1: Proximity Pairing with AirPods in Their Charging Case

  1. Put on your primary AirPods and start playing music, a podcast, or a video on your iPhone or iPad.
  2. Swipe down from the top-right corner of the screen to open Control Centre (or swipe up from the bottom on devices with a Home button).
  3. In the top-right media playback tile, tap the AirPlay icon (the triangle with concentric audio rings).
  4. Below the name of your connected headphones, tap Share Audio.
  5. Bring the second pair of AirPods close to your iPhone or iPad while keeping them inside their charging case, and open the case lid.
  6. When the second pair appears on your screen, tap Share Audio.
  7. If prompted, press and hold the setup button on the back of the second AirPods charging case until the status light flashes white.
  8. Tap Done once the pairing confirmation appears.

Method 2: Pairing AirPods Already Worn by Another Person

If your friend is already wearing their AirPods or AirPods Max:

  1. Open Control Centre on your iPhone and tap the AirPlay icon within the media tile.
  2. Tap Share Audio.
  3. Ask your friend to bring their iPhone or iPad close to yours, or bring their worn AirPods close to the top edge of your device.
  4. A notification appears on your screen asking to share audio. Tap Share Audio, and have your friend tap Join on their screen if a confirmation prompt displays.

Managing Individual Volume Levels During Audio Sharing

One of the most practical aspects of Audio Sharing is that listeners do not have to settle on a single audio level. If one person prefers quiet dialogue while the other requires higher volume, levels can be adjusted independently.

Adjusting Volume via Control Centre

  1. Open Control Centre while audio is actively streaming.
  2. Touch and hold the large vertical Volume slider.
  3. The slider expands into two separate volume controls, each clearly labelled with the respective listener’s AirPods name.
  4. Drag individual sliders up or down to set personalised volume levels, or adjust the primary slider on the main Control Centre card to raise or lower both headphones proportionally.

Adjusting Volume on the Lock Screen

When your iPhone is locked, the media player tile on the Lock Screen displays dual volume sliders side by side. Drag either slider directly from the Lock Screen without unlocking your device.

Hardware Volume Controls

Each listener can also use the physical hardware controls on their own headphones:

  • AirPods Pro (2nd gen): Swipe up or down on the touch sensor stem.
  • AirPods Max: Turn the Digital Crown clockwise or anti-clockwise.
  • Beats headphones: Press the physical volume buttons on the earcups.

Adjusting the volume on one pair of headphones alters only that user’s level without changing the other listener’s volume.

Noise Control Modes During Shared Listening

When using AirPods Pro or AirPods Max, both listeners can independently select their preferred noise control mode:

  • Active Noise Cancellation (ANC): Blocks ambient travel sounds, engine hum, and background chatter.
  • Transparency Mode: Allows external announcements or flight attendant speech to filter through naturally.
  • Adaptive Audio: Dynamically blends Transparency and Active Noise Cancellation based on surrounding noise conditions.

To switch modes, each user can press and hold the stem sensor on their AirPods Pro or press the Noise Control button on AirPods Max. Alternatively, open Control Centre, press and hold your designated headphone volume slider, and tap Noise Control at the bottom of the screen.

How to Disconnect the Second Pair of AirPods

When your listening session ends, disconnecting the second pair takes only a couple of taps:

  1. Open Control Centre on your iPhone or iPad.
  2. Tap the AirPlay icon in the media playback card.
  3. Locate the second pair of headphones in the device list.
  4. Tap the tick mark next to the second pair to disconnect them.

Alternatively, the second listener can simply place their AirPods back inside their charging case and close the lid, or connect them back to their own iPhone or Mac via Bluetooth.

Troubleshooting Common Audio Sharing Problems

The “Share Audio” Button Does Not Appear

  • Verify that Bluetooth is enabled on both devices in Settings > Bluetooth.
  • Ensure audio is actively playing through your primary headphones before tapping the AirPlay icon.
  • Check that both devices meet the minimum compatibility requirements outlined above.

The Second Pair Fails to Connect

  • Place both earbuds of the second pair firmly inside their charging case.
  • Keep the case within 5 to 10 centimetres of the host iPhone.
  • Hold the physical pairing button on the rear of the second case for 3 to 5 seconds until the LED pulses white.
  • If the case battery is depleted below 20%, charge it briefly before attempting to pair.

Audio Cuts Out or Suffers from Stuttering

  • Audio Sharing doubles the Bluetooth transmission bandwidth required by your iPhone. Move away from high-interference radio sources such as unshielded Wi-Fi routers or microwave appliances.
  • Ensure both listeners remain within standard Bluetooth range (approximately 5 to 8 metres) of the host device.
  • Restart the host iPhone or iPad if intermittent audio dropouts persist across different media applications.

Get the best tech tips delivered straight to your inbox.

Join thousands of readers mastering Apple, Google, Microsoft, and Linux.