How to Enable and Configure Wake on LAN in Windows 11

Accessing desktop workstations remotely via Remote Desktop (RDP), retrieving files from home media servers, or running scheduled maintenance tasks often requires target computers to remain powered on continuously. However, leaving high-performance desktop PCs operating 24 hours a day wastes substantial electrical power and generates unnecessary ambient heat and component wear.

Wake on LAN (WoL) is an industry-standard networking protocol that allows sleeping or powered-down computers to be remotely awakened across local Ethernet networks. By transmitting a specially formatted network packet—known as a Magic Packet—to the target computer’s network interface card (NIC), administrators and remote workers can wake Windows 11 PCs on demand from a smartphone, laptop, or home automation gateway.

How Wake on LAN Operates

When a WoL-enabled PC enters sleep or hybrid shutdown:

  • The computer’s power supply maintains a low-voltage standby current (+5VSB) to the motherboard and Ethernet controller.
  • The network interface card remains in an ultra-low-power listening state, scanning incoming link layer frames.
  • A remote device transmits a Magic Packet—a broadcast frame containing 6 bytes of all 255s (FF FF FF FF FF FF) followed immediately by 16 repetitions of the target network card’s 48-bit MAC address.
  • Upon validating the magic packet pattern, the network adapter asserts a power-management signal to the motherboard, triggering the computer to boot.

Configuring Motherboard BIOS / UEFI Settings

Because Wake on LAN requires hardware-level power support, you must enable WoL in your PC’s UEFI firmware first:

  1. Reboot your Windows 11 PC and press the designated firmware key (typically Delete, F2, or F12) during initial boot.
  2. Navigate to the Power Management, ACPI, or Advanced configuration menu.
  3. Locate settings such as Wake on LAN, Power On By PCIe Device, or Resume by Onboard LAN and set them to Enabled.
  4. Disable aggressive ultra-deep sleep states (such as ErP / EuP Ready or Deep Sleep), as these states cut standby power to the Ethernet port entirely.
  5. Save your changes and boot into Windows 11.

Configuring the Network Adapter in Windows 11 Device Manager

Once hardware power is established, configure the network interface card driver within Windows 11:

  1. Right-click the Start button on the taskbar and select Device Manager.
  2. Expand the Network adapters branch.
  3. Right-click your physical Ethernet adapter (e.g., Intel Ethernet Controller or Realtek PCIe GbE Family Controller) and select Properties.
  4. Switch to the Power Management tab.
  5. Tick the following checkboxes:
    • Allow this device to wake the computer
    • Only allow a magic packet to wake the computer (essential to prevent random broadcast network chatter from accidentally waking your PC)
  6. Switch to the Advanced tab.
  7. Scroll through the property list and verify the following settings:
    • Wake on Magic Packet: Set to Enabled.
    • Energy Efficient Ethernet / Green Ethernet: Set to Disabled if experiencing packet drop during sleep.
    • Shutdown Wake-On-Lan: Set to Enabled if waking from complete shutdown.
  8. Click OK to commit the driver settings.

Disabling Fast Startup in Windows 11

Windows 11 utilizes Fast Startup by default, which places the operating system into a hybrid hibernation state upon shutdown. On many network chipsets, Fast Startup disconnects the network card’s standby power, preventing WoL from functioning when the PC is shut down:

  1. Press Windows Key + R, type control, and press Enter to open the classic Control Panel.
  2. Set the view to Large icons and click Power Options.
  3. In the left sidebar, click Choose what the power buttons do.
  4. Click Change settings that are currently unavailable to gain administrator clearance.
  5. Under Shutdown settings at the bottom of the window, untick Turn on fast startup (recommended).
  6. Click Save changes.

Testing Wake on LAN with a Magic Packet

To wake your PC from another device on the same local network:

  1. Note your target PC’s physical MAC address by running getmac /v or ipconfig /all in Command Prompt.
  2. Put your Windows 11 PC to sleep.
  3. From a secondary PC, smartphone, or router interface, use a standard WoL client (such as Wake on LAN for iOS/Android or PowerShell Send-Packet scripts) and enter the target computer’s MAC address and broadcast IP (e.g., 192.168.1.255 on UDP port 9).
  4. Transmit the packet. The sleeping PC will spin up its fans and resume to the Windows lock screen within seconds.

Configuring Wake on LAN enables seamless remote desktop access while keeping energy consumption and operational costs to an absolute minimum.

Get the best tech tips delivered straight to your inbox.

Join thousands of readers mastering Apple, Google, Microsoft, and Linux.