How to View, Flush, and Reset the ARP Cache in Windows 11

The Address Resolution Protocol (ARP) translates 32-bit Internet Protocol (IPv4) addresses into 48-bit Media Access Control (MAC) addresses on local area networks. To avoid flooding your local router or network switch with broadcast requests for every individual data packet, Windows 11 maintains a temporary local cache in system memory. However, when router hardware is replaced, network cards change, or IP address conflicts arise, stale or poisoned ARP entries can lead to packet loss, gateway dropouts, and communication failures.

Auditing and clearing the ARP cache allows you to purge corrupt local network mappings and force Windows 11 to rediscover active hardware devices across your subnet.

Understanding Dynamic and Static ARP Cache Entries

The Windows ARP cache categorises network bindings into two distinct types:

  • Dynamic Entries: Generated automatically through broadcast queries during normal network communication. Dynamic mappings expire after several minutes of inactivity to accommodate changing IP assignments.
  • Static Entries: Permanent entries manually created by administrators or network virtualisation adapters (such as Hyper-V or VPN clients) that persist until a system reboot or manual deletion.

How to View the ARP Table in Windows 11

Before purging entries, inspect the active network neighbour mappings to identify discrepancies or duplicate hardware MAC addresses:

  1. Right-click the Start button on the Windows taskbar and select Terminal (Admin) or search for PowerShell and select Run as Administrator.
  2. In the console prompt, execute the standard ARP utility:
arp -a
  1. The command outputs every active network interface alongside its physical MAC address and assignment type.
  2. To filter results to a specific network adapter (for example, your local Ethernet interface assigned IP 192.168.1.150):
arp -a -N 192.168.1.150

Flushing the ARP Cache Using Netsh

In modern Windows releases, executing the legacy command arp -d * can return an error stating The ARP entry deletion failed: Access is denied, even when run inside an elevated administrative shell. This occurs because modern Windows TCP/IP networking architecture delegates table modifications to the netsh interface subsystem.

  1. Open an elevated administrative PowerShell or Command Prompt window.
  2. Execute the netsh flush command:
netsh interface ip delete arpcache
  1. The terminal will return Ok. to confirm the local cache has been cleared.
  2. If you only need to delete a single stale IP mapping without affecting other network hosts:
arp -d 192.168.1.1

Clearing the Neighbour Cache Using PowerShell Cmdlets

Windows 11 provides modern PowerShell cmdlets via the NetTCPIP module that offer granular control over network neighbour resolution across both IPv4 and IPv6 protocols:

  1. To inspect current network neighbours along with their operational reachability states (such as Reachable, Stale, or Unreachable):
Get-NetNeighbor -AddressFamily IPv4
  1. To flush all cached neighbour entries across all network interfaces without interactive confirmation prompts:
Remove-NetNeighbor -AddressFamily IPv4 -Confirm:$false
  1. To target only a specific network adapter (e.g. Wi-Fi):
Remove-NetNeighbor -InterfaceAlias "Wi-Fi" -Confirm:$false

Executing a Complete Local Network Stack Reset

When resolving persistent connectivity issues such as default gateway drops or IP address conflicts, combining an ARP flush with a DNS cache clear and Winsock catalog reset ensures all cached network data is refreshed:

  1. Run the following sequence in your administrative terminal:
ipconfig /flushdns
netsh interface ip delete arpcache
netsh winsock reset
  1. Restart your PC to allow Windows to re-initialise socket connections and rebuild the ARP table dynamically during startup.

Get the best tech tips delivered straight to your inbox.

Join thousands of readers mastering Apple, Google, Microsoft, and Linux.